MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Structure & Mechanics > 10. Base Table
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Fri 06 June 2008, 19:52
pafnc
Just call me: paul
 
charlotte NC
United States of America
maximum tabel size ?

whats the longest table i can build can it be 20 feet long and how much more will this cost other than the steel
Reply With Quote
  #2  
Old Fri 06 June 2008, 21:20
dmoore
Just call me:
 
Quote:
Originally Posted by pafnc View Post
whats the longest table i can build can it be 20 feet long and how much more will this cost other than the steel
Let me ask what you have planned for your machine:
  • Materials cut
  • Size of materials
Reply With Quote
  #3  
Old Fri 06 June 2008, 22:28
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Here is a 20' long MechMate <-----link

The length of table is virtually unlimited since all the intelligent motors and electrics sit on the gantry - the table is very dumb.

Once you go over about 12ft long, start thinking of more legs bolted to a concrete floor.....or, increasing material cross-sections of the longitudnal frames.

The costs escalate for the steel, but also for the cables, cable carrier (e-chains are not essential), gear racks.

Handling a dust collection hose of that length could become a big problem. If you have a lot of ceiling height above, you could think of suspending a hose (plus the cables)......
Reply With Quote
  #4  
Old Sat 07 June 2008, 05:10
pafnc
Just call me: paul
 
charlotte NC
United States of America
David one of the things i would like to do is route stair stringers
which i can get 9 .25 inches x 20 feet
Reply With Quote
  #5  
Old Sat 07 June 2008, 10:29
dmoore
Just call me:
 
Quote:
Originally Posted by pafnc View Post
David one of the things i would like to do is route stair stringers which i can get 9 .25 inches x 20 feet
Let the internet be your friend.... search around and you'll find some stuff like this:

http://www.talkshopbot.com/forum/mes...tml?1201906860

http://www.talkshopbot.com/forum/mes...tml?1082996801

You could easily build a 10ft machine and cut the 20+ft stringers.
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 23:33.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.