MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > The Market Place
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools
Old Wed 30 January 2019, 01:42
Just call me: Leonard
South Africa
South Africa Nema 34, rack and pinions and bearings

Total R24000 Zar

-4 x Stepper motor Nema 34 WT86STH118-6004A 5.6A 8.7N-m(1232oz-in) 99mm
-4 x Stepper motor driver DQ860MA 7.8A 80V 256 micro-steps
-4 x Power supply : 350W 60V
-1 x Pc breakout board and cable + Extra set
-16 x W3X bearings
-4 x 2m module1 racks
-4 x Module1 22 teeth pinions

Contact me for more information or if you need more specifications or wiring diagrams?

Please note this is the last set, so first come first serve.

Kind Regards
Leonard v.d. Merwe
072 779 7237

Reply With Quote
Old Wed 30 January 2019, 02:37
Just call me: Leonard
South Africa
Some more information:

Stepper Motor Specifications:
Step Accuracy = 5%
Temperature Rise = 80C Max
Ambient temperature Range = -20C—+50
Insulation Resistance = 100MΩMin.500VC DC
Dielectric Strength = 500V AC 1 minute
Step Angle 1.8
Rate Voltage 3.08V
Rate Current 5.6A
Phase Resistance 0.55Ω
Phase Inductance 5.5 mH
Holding Torque 1232 (OZ-IN)

Stepper Motor Driver:
High performance
Average current control, 2-phase sinusoidal output current drive
Supply voltage from 24VDC to 80VDC
Opto-isolated signal I/O
Overvoltage, under voltage, overcurrent, phase short circuit protection
14 channels subdivision and automatic idle-current reduction
8 channels output phase current setting
Offline command input terminal
Motor torque is related to speed, but not related to step/revolution
High start speed
High holding torque under high speed
Input Voltage 24-80 VDC
Input Current < 6A
Output Current 2.8A ~ 7.8A
Consumption : 80W; Internal Insurance 10A
Working Temprature -10~45℃
Stocking temperature -40℃~70℃
Weight 500G

Last edited by iclazion; Wed 30 January 2019 at 02:56..
Reply With Quote
Old Mon 04 February 2019, 00:05
Just call me: Leonard
South Africa
Price from 04/02/2019 is R16000
Reply With Quote
Old Sun 11 October 2020, 15:09
Just call me: Roelof
South Africa
Is this still for sale?

Hi there, im also in SA, is this still for sale?
Reply With Quote

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Newbie from South Africa Anscheepers Introduce yourself and start planning 9 Sun 04 March 2018 22:10
Hi my name is mohamed from south Africa mohamed Introduce yourself and start planning 6 Wed 25 June 2014 06:17
CNC IMPORT South Africa Kobus_Joubert The Market Place 5 Sun 27 June 2010 12:36
"High tech" Rack and pinions Nexengroup Pierre GRAND Archives 12 Fri 25 January 2008 06:17
Buying rack & pinions in South Africa JanJC Archives 1 Tue 16 October 2007 23:41

All times are GMT -6. The time now is 07:28.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.