|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
|
Thread Tools |
#1
|
|||
|
|||
Which Oriental Motor For 2018
Which Oriental Motor, is recommended for 2018?
|
#2
|
|||
|
|||
PK296A2A-SG7.2 from Oriental Motor Company $257
|
#3
|
|||
|
|||
What are you cutting with your machine. If doing fine detail 3d work I would not recommend a Spur Gear because of the backlash that will always be present in a gearbox. I would recommend a stepper with a belt reduction instead.
|
#4
|
|||
|
|||
I cut exterior fretwork mainly 1 inch, and 1.25" Extira.
|
#5
|
|||
|
|||
Even with belt reduction you're going to get some unsavory indications of the gears themselves.
|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stepper motor & Driver from Oriental motor | steven29 | 701. Motor Drives | 17 | Sun 17 May 2015 11:20 |
Oriental Motor PK296A2A-SG36 | alan254 | The Market Place | 4 | Sun 11 May 2014 05:15 |
Oriental Motor 7.2 Motors Available in the US | MetalHead | The Market Place | 4 | Mon 10 January 2011 05:15 |
What does a stepper motor look like inside? (geared Oriental Motor) | Gerald D | Motors & their mountings | 0 | Sat 16 August 2008 08:29 |
Oriental Motor having school near you! | smreish | Archives | 3 | Fri 28 March 2008 15:49 |