MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > After Building the Beast - Operating , Troubleshooting and Maintenance > Cutting various materials - bit selection, feeds, speeds
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Mon 17 August 2009, 21:24
Besser
Just call me: Besser
 
Vic
Australia
Cutting Flatout! - monitoring and optimising the current drawn by the spindle/router

Something I came across in my travels in and out of CNC workshops is the load feedback loop. Can we or does anyone incorporate this into MM use.

This feedback loop measures the load on a motor by how much current is being drawn, for 2 functions.

1:Used to determine the maximum cutting load possible for the motor rating (eg full load current (spindle or router and possibly steppers for feed rates) This means you can start to maximise your cutting speed and reduce part completion time.

2: Monitor bit quality. For repetitive cuts a history of load (amps) can be mapped and applied to the live cut, as the bit starts to wear and blunt then the current draw for the path increases and the software can flag a warning or stop. Additionally if a spike (up = tool jam, down= tool break) occurs then the machine can auto shutdown.

I intend to hook up a VFD and want to look at incorporating this principle so if someone is already doing it here, I'm happy to follow the leader.
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Transformer supply current versus Gecko output current . . . . . Mike Richards 702. Power Supplies 42 Fri 15 January 2010 04:37
High End Router or Spindle, which way to go? kanankeban 50. Toolheads 14 Thu 02 April 2009 23:54
Router Spindle Recommendation? robertmonroe 50. Toolheads 1 Thu 04 December 2008 02:00
Router / Spindle cable management gmessler 60. Wiring & Cable Management 1 Sun 19 October 2008 19:01
Where can i get full cad drawn like the pdf file eloid Archives 12 Mon 14 May 2007 10:37


All times are GMT -6. The time now is 07:02.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.