|
|
|||||||
| Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools |
|
#1
Wed 27 May 2009, 17:40
|
|||
|
|||
|
hi to all - Lenexa,Kansas, USA
Iam Rusty been cabinet maker 30 years and Know work as Designer/CNC Programmer for KC Store Fixtures Kansas City ,MO.
Still Have full Wood Shop At home and also Have a Milling Machine Am looking foward to Building mye own CNC Router this seem to fit my needs Hope all will help with Good advice. Thanks Rusty 
|
|
#2
Wed 27 May 2009, 21:16
|
|||
|
|||
|
Welcome Rusty,
I'm sure good advice is all that will be given. The best I can give at the moment is follow the plans as closely as possible. I think it would be hard to go wrong if the machine was built exactly as the plans show. Having said that, I did not follow the polans exactly and my machine is very acceptable. Regards, Jayson.
|
|
#3
Thu 28 May 2009, 04:10
|
|||
|
|||
|
Rusty,
Look forward to seeing your build.
|
|
#4
Thu 28 May 2009, 06:49
|
|||
|
|||
|
Welcome Rusty.
Have a look around, there is lots to see and do here. 
|
|
#5
Tue 16 June 2009, 19:55
|
|||
|
|||
|
mye build won,t be fore awhile
But know that this best rig Ive seen for the money,but money
tight being as my wife has cancer even tougher! So hope to raise money later with some of mye side projects iam working on!
|
|
#6
Tue 16 June 2009, 22:22
|
|||
|
|||
|
I'm sorry to hear that Rusty. I'm hoping for your wife's quick recovery so that you can get started soon.
|
|
#7
Wed 17 June 2009, 06:55
|
|||
|
|||
|
Rusty, you won't find a better group of guys than here, and not just to help guide you through your build. Hope your wife will be blessed with a clean bill of health in the very near future.
Jay W
|
|
| Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
| Thread Tools | |
|
|
