|
|
|||||||
| Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools |
|
#1
Fri 24 December 2010, 10:02
|
|||
|
|||
|
Hello from Clarksburg, WV
Merry Christmas to all. I am in the process of building 2 machines. The frist is about 1/4 complete and is my own design that will be a dedicated plasma machine (6' x 5'). The second is a router table (MM) that I plan to do extensive 3D relief cutting on doors and signs. This table will be at a minimum 4' x 8', servo drive, spindle or router to be detrermined.
I am green as grass in knowledge for wood routing in terms of bit selection, roughing, finishing, and most importantly is detailing. I will be primarily using pine, fir, oak, and poplar. Anyone have thoughts to help a newbie taking the right path? 
|
|
#2
Fri 24 December 2010, 20:37
|
|||
|
|||
|
Welcome to the team !!! Looking forward to your build.
Happy Holidays to everyone out there around the World !!!
|
|
#3
Sat 25 December 2010, 08:31
|
|||
|
|||
|
Welcome Rick!
|
|
| Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
| Thread Tools | |
|
|
