MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Structure & Mechanics > 20. Gantry
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Tue 17 April 2007, 21:24
dneisler
Just call me:
 
10 20 235 Placement question - where does this part go?

Gerald,
Been reading the plans alot lately since I am about to get a little time, to MAYBE start a build. I am not seeing or understanding the placment or use of this item. Probably right under my nose and just not seeing it. Can you shed some light on it?
Reply With Quote
  #2  
Old Tue 17 April 2007, 22:20
Gerald_D
Just call me:
 
When having problems like this, look at the top left corner of the title block of a drawing. In this case it says: Higher drawings: 10 20 200 A (1x assembly per gantry).

On drawing 10 20 200 A you will see 10 20 235 mentioned.

It goes down the inside of the gantry tubes, and it acts as a row of nuts for the screws that hold the y-rail down.
Reply With Quote
  #3  
Old Wed 18 April 2007, 07:22
dneisler
Just call me:
 
That is what I was thinking, just never could confirm it.

Thanks
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:13.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.