#1
|
|||
|
|||
Toothed, Timing Belt Suppliers
New to the forum today, but have a CNC Router for 12 yrs, looking for a supplier to purcase the Greenish Pinion Belts for the x,y motor belts,any help will be greatly appericated:::thanks cool:
|
#2
|
|||
|
|||
I don't know what kind of belt you're looking for.
But go to ebay and search for dealer named polybelt, his/her ebay listing is among the cheapest (i think). try this one |
#3
|
|||
|
|||
The polybelt on ebay is for the "H" size toothed pulleys. That size is much larger than the XL size that I used when I build my belted-transmission.
|
#4
|
|||
|
|||
The ‘Greenish’ belt you refer to may be a Polyurethane Timing Belt. Try here:
https://sdp-si.com/eStore/Direct.asp?GroupID=213 for other timing belts try here: https://sdp-si.com/eStore/Direct.asp?GroupID=214 With the timing belt worn and 12 years service you may need other drive components too. http://www.sdp-si.com/web/html/drivesystems.htm Good luck, BillT |
#5
|
|||
|
|||
Quote:
i was searching for belt sometime ago and this is the cheapest i got. XL belt 3/8" wide cost more at other popular internet store. typically about $2.XX per foot. the only downside is the price of the pulley, but it can sustain more load for sure. And the size of the contraption grows too |
#6
|
|||
|
|||
This site is good to........www.econobelt.com
Look to the top of the pulley selection page to change tooth count. |
|
|