|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
|
Thread Tools |
#1
|
|||
|
|||
Hello, A mechmate future TUNISIA
Hello
am Tunisian and I will soon build a mechmate Tunis First of all I thank you for sharing all this information I intend to build a machine for wood I ask your opinion on this hardware configuration http://www.slidesandballscrews.com/2m880n-microstepping-driver-p-303.html?cPath=44_97[/URL] http://www.slidesandballscrews.com/s...ml?cPath=45_82 http://www.slidesandballscrews.com/p....html?cPath=54 http://www.slidesandballscrews.com/p....html?cPath=46 I'm sorry, my English is very bad, use the google translation |
#2
|
|||
|
|||
Welcome !!!!
|
#3
|
|||
|
|||
Hi Hedi, your choice looks like this:
Motors: SY85STH118-6004 Current (phase) 6 Amp Length 118mmInductance (phase) 6.5 mH Drives: 2M880N8A current rating 24-70V DC supply Autotune function for improved smoothness and performance. Over-voltage, under-voltage, short circuit, overheat protection. Power Supply: PS705: 75V DC at 0A & 68V DC at 5A 340W (Continuous) = 340 VA Parallel Break Out Board: PCPPS-2 Those motors need quite lot of current and one power supply will not drive all 4 of them together. |
#4
|
|||
|
|||
Quote:
thank you very much to answer me quickly Food I must have 2 (PS705) but your opinion is good or not configuaration because I need a supplier in London is my brother that I'll bring in Tunisia SVP is what you have an address in London where I found the right configuration for my future Mechmate thank you very much |
#5
|
|||
|
|||
Salut Hedi bienvenue !
|
#6
|
|||
|
|||
hello Gerald
I'm still waiting your reply about the hardware configuration to make my future mechmate thank you very much |
#7
|
|||
|
|||
salut FAWZI merci
contant de vous connaitre de quel pays vous ete |
#8
|
|||
|
|||
#9
|
|||
|
|||
Quote:
|
#10
|
|||
|
|||
Quote:
thank you very much for answering me so I understand your message that I must * 4 engines SY85STH80 NEMA 34 * 4 drievers 2M880N * 2 power supplies PS 705 * 1 Breakout PCPPS2 but you think this electronic kit is good for making a Mechmate I need your opinion please thank you very much |
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
hello, a future mechmate in france (tarn) | athanase81 | Introduce yourself and start planning | 8 | Wed 03 July 2013 12:43 |
Dreaming a future mechmate | isladelobos | Miscellaneous / General / Whatever / Catchall | 6 | Sat 20 December 2008 05:34 |
The hardware interface between PC and motor drives - the future beyond parallel BOB? | Gerald D | 70. Control Systems | 16 | Mon 10 December 2007 11:09 |