#122
|
|||
|
|||
Wiring started, pictures of whats done so far ...
wiring1.JPG wiring2.JPG motor1.JPG wiring3.JPG wiring4.JPG wiring5.JPG Still need to get Teflon washers for motor mounting and pivot points. Also wiring need more tiding up and most probably all of the MM need another coats of paint Thanks for looking, Anil |
#123
|
|||
|
|||
great work
|
#124
|
|||
|
|||
I like Red and White.
|
#126
|
|||
|
|||
Almost there
After encouragement from fellow member, decided to post pictures of my control box (Biiiig one ).
front.jpg Green is power indicator and other 2 red are to indicate 2 relay outputs, spindle and dust collector. sider.jpg motorin.jpg sidel.jpg front.jpg cpufp.jpg door.jpg withoutbob.jpg And hand made Bob till PCB is ready, for testing withbob.jpg Transformer has 3 tap so that motor voltage can be tweaked. xformer.jpg Plate where all ground wires terminates ground.jpg It look fine except bad paint job done by me as usual full.jpg |
#127
|
|||
|
|||
Nicely going ANIL….
It sure looks like you’re very close to a rolling day! Wishing you all the best and a smooth final tuning !! Amicalement, Robert |
#128
|
|||
|
|||
Cool man !!!
Now start making dust and get first 2010 # |
#129
|
|||
|
|||
Good Job ! Take care to have the control box cleaned out of any wire pieces lying around, thy make beautyful sparks!!!
Happy New Year! |
#130
|
|||
|
|||
Thanks Robert, Sharma,
Hope to qualify for first # of 2010 |
#131
|
|||
|
|||
Right Claus, it gets a vacuum cleanup after wiring done. Wish you and all here a happy new year.
|
#132
|
|||
|
|||
MM Logo
Wishing all at MM forum a Happy new year 2010
Got Logos printed, will paste them today and do a pen test as I don't have spindle/router yet. |
#133
|
|||
|
|||
Go Roaring Anil. All the best. Happy New Year to one and all at the Forum too.
|
#134
|
|||
|
|||
Way to go. Lets see those pen marks!
|
#135
|
|||
|
|||
Its moves :) :)
My telephone (internet) was down last few days and could not update.
After pen marks (in first pic, those marks are supposed to be roadrunner ), I moved on and installed a die grinder I had in place of spindle and finally it makes dust.. First few final shots with logo pasted logo1.jpg cntrl-box.jpg Z-proxy is mounted directly on spider plate, a bit off center, It works fine. z-proxy.jpg Quick change mount works great, and here is die grinder in place.. qc-mount.jpg router.jpg Broken my first router bit in MM, my mistake instead of typing -0.1, typed -1.0 for the Z and the machine happily plunged exactly 1 inch without a strain bit-broken.jpg Now using a broken drill bit for testing using-broken-drill.jpg And look at the dust, huurreey... dust1.jpg Here is closeup, size is approx 12 inch, rapid 400 ipm, feed 50 ipm, broken drill bit approx 1 mm. closeup.jpg |
#136
|
|||
|
|||
Yippie !!!
Congrats for the first MM # in 2010 !!! Nice Carvings... |
#137
|
|||
|
|||
Thanks to Gerald, Claus, Leo, Pady, Irfan, Robert, Sharma, Chopper and all the members for looking at my build, not good looking but it works
I'm sorry if I forgot to mention any names, no disregards please Last edited by aniljangra; Mon 04 January 2010 at 01:28.. |
#138
|
|||
|
|||
Well done Anil!
|
#139
|
|||
|
|||
Great job Anil! Congrats!
|
#140
|
|||
|
|||
Thank you Gerald for the #44
Thank you Ken. Need to do the PCB for BoB today as I am still using my handwired board. |
#141
|
|||
|
|||
Well done ! I presume you have the same feeling when you see that monster who was a few month ago just some metal bars, wires and now is moving.
|
#142
|
|||
|
|||
Anil
Congratulations on #44. |
#143
|
|||
|
|||
Isn't feelings are such that when we see newborn ?
Congratulations on first #2010 Welcome to growing Indian MM club. And don't worry about broken bits, now we have good (cheap) source, don't we |
#144
|
|||
|
|||
Well said, the feeling is exactly same
|
#145
|
|||
|
|||
Congratulations Anil!
|
#146
|
|||
|
|||
Well done Anil...let the real fun begin....
|
#147
|
|||
|
|||
I am very happy for you Anil. You have done a great job on your machine.
|
#148
|
|||
|
|||
Enjoy , and well done Anil
|
#149
|
|||
|
|||
Thank you Kobus, Leo, Heath, Hennie and everyone, I got ideas for executing bits and pieces from almost everyone's thread
|
#150
|
|||
|
|||
Félicitation Great for you 1 instead of .1 not as bad as 5 instead of .5 happy pole vaulting
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
My Mechmate coming up - India | Manjeet Singh | Construction started, but not cutting yet | 13 | Sat 24 May 2014 22:49 |
Checking continuity of wiring with Antec Power Supply Connected | oliver2257 | 702. Power Supplies | 0 | Wed 30 November 2011 15:52 |
New Guy from India | ksgpathi | Introduce yourself and start planning | 1 | Wed 26 January 2011 14:56 |
Checking Parts List confirmation of pinion & gearbox | DocTanner | Motors & their mountings | 21 | Fri 09 February 2007 11:53 |