![]() |
#31
|
|||
|
|||
And what's the down side or problem with that???
![]() |
#32
|
|||
|
|||
Sorta like rabbits.
![]() |
#33
|
|||
|
|||
Irfan did you finish the blower casing, if so can we please see some pic.
I'm building mine right now and I like to see one finished. |
#34
|
|||
|
|||
casing pics
some work done on casing- was in a hurry so did not resize - just zipped and attached
|
#35
|
|||
|
|||
unzipped the images now
one of the things I have done without wandering around!
|
#36
|
|||
|
|||
some more pics
some more of the pics - wife helped by painting the primer on the MDF, dad helped me today to put things together.
|
#37
|
|||
|
|||
Looks great Irfan. I'm impressed. Keep up the good work.
|
#38
|
|||
|
|||
Thanks Doug - need the words
![]() |
#39
|
|||
|
|||
yes looking real good. what is your plan about the exhaust to the filter ?
|
#40
|
|||
|
|||
no plans yet mike
|
#41
|
|||
|
|||
case mounted over cyclone
some more pics
|
#42
|
|||
|
|||
You're going to love the improvement in your shop's air quality.
|
#43
|
|||
|
|||
nice, you are almost there
![]() Here is a pic. of my Cyclone build, just need to fit the blower on a bracket and then mount it on the wall. then come all the tubes to the router and dust shoe. also need a filter system, but have no idea what I want yet ![]() |
#44
|
|||
|
|||
Looks great Mike. I wasn't as smart as you and Irfan so I bought a cyclone. The filters they sent me were intake filters from a tractor trailer. They seem to work well. The other alternative is to exhaust the unfiltered air to the outside. Unfortunately, if you are working in a heated space, all of your heated air will be sent outdoors. If you recycle the filtered air in your workshop, you get to keep the heated air.
Good luck with your build. |
#45
|
|||
|
|||
You guys are doing a nice job on building your cyclone.
I am very pleased with the modification I have made to my Harbour Freight dust collector. It isn't a cyclone but it works like one and I don't notice any dust. You might look at these filters: http://www.wynnenv.com/ I replaced the cloth bag with one of these filters and it is doing a great job. |
#46
|
|||
|
|||
Cyclone
Great looking job guys, thanks for that post Nils. Just what I was looking for.
|
#47
|
|||
|
|||
unfortunately nils - we dont have suppliers like that here in India
|
#48
|
|||
|
|||
mike can we have some closeup pics of the blower and the motor mounting , you are very fast in your build.
for the filter - i will jut put a bag and leave it -that is what I can afford @ this time |
#49
|
|||
|
|||
I seem to remember that the ClearVue that is similar to the one you are building uses two filters with 300 sq ft of filter material each.
I don't know if you can get material you could pleat to make the filters yourself. Some information is found at Wynn Environmental, filter model 9L300BL is what they use. The really fine material is what is really dangerous, so you need something that will filter .3 micron or better. It would be great if we could all use systems lile your with really good filters like these. If those filters are not possible, see if you can get masks with particulate filters that are like that (in the USA they are rated as P100). Again it is focusing at the really fine material. I hope this helps. ... It would be great to keep all the MechMate users safe world wide, in a less expensive manner. |
#50
|
|||
|
|||
Jack,
I am using the 9E110SB Filter that is made of spun material and can be washed. It is more expensive but I will never have to buy another filter or bag again. |
#52
|
|||
|
|||
attachment to the setp to attach the bag filter
made attachment to attach the bag filter.
|
#53
|
|||
|
|||
Today was so difficult - I just about managed to finish mounting the motor rock steady to the wall - doing it up above was very difficult. I have to thank my Dad who helped me to get it up there - I did not take pics as it was late for friday's prayers. Anyways its done and I will start it up tomorrow and probably finish the cyclone work tomorrow - I still need some 6" PVC pipe and the 4" flexible hose , I also have got the bag filters for which clamps were made today.
ah that's some high expenditures ![]() Have a great weekend everybody! RGDS IRfan |
#54
|
|||
|
|||
finally blower was powered on today
WOW what a sound it makes - the whole casing shudders bcos its just made of thin GI sheet and MDF,
I am so afraid to put it on! well it worked alright though! now just need to attach the bag filters and the bottom container and its done then! |
#55
|
|||
|
|||
Ah : running the blower a couple of times has made it to loosen the anchor bolts from the wall - I think I need to put on the thru the wall bolts.
a near disaster was averted when the blower started making wierd noise and I went over to chk it and the frame holding the motor was all out - away from the wall! I have to do thank you prayer to Allah! |
#56
|
|||
|
|||
Glad you are still with us Irfan!
Use some M10 threaded rod and 50mm sq plates bolted 'thro' the wall. That should hold it. |
#57
|
|||
|
|||
![]() |
#59
|
|||
|
|||
You are right G' need to do that too.
|
#60
|
|||
|
|||
finally mounting secured
finally we ran the blower successfully with full confidence after every bolt and nut was secured fully.
now just need to get the dust container connected to the cyclone. |
![]() |
|
|