|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
|
Thread Tools |
#1
|
|||
|
|||
Can I use this for vacuum pump?
Hi all,
can I use this blower as a vacuum pump? I really hate burning anymore of the house vacuum cleaner. |
#2
|
|||
|
|||
sure you can any blower can be use as a dust collector, the question is only how effective...
|
#3
|
|||
|
|||
15mgtar, are you looking to use that as a vacuum pump or a dust collector?
It doesn't look like it will pull very much vacuum to me; seems to be more of a high volume low pressure device. As a dust collector, I'd be concerned about large chips and that squirrel cage, so you'd probably want some sort of chip separator in front of it. |
#5
|
|||
|
|||
Hi 15mgtar,
I've just setup vac hold down on my Mechmate and I experimented with a number of pumps borrowed from a vendor and settled on a 10HP roots blower with 3" ins and outs. I tried a standard 10 hp blower like the one in you picture. It just doesn't work. It pulls about 2-3 inches Hg at best. I even tried a 15hp regenerative blower and that achieved 7-9 inches. The air volume was incredible, and the hold down power was acceptable, but pulled almost 40 amps. I also tried vane pumps (becker style) in a range of hp. Those pulled an astounding 24-25" Hg but to achieve good air volume like the roots, I had to shell out some major $$$$. They are the best in terms of noise level and vac performance. The roots I ended up with will pull about 18" and will do about 200 CFM for air volume. All the equipment I refered to were referbished. The roots set me back about $1000 for just the pump. The whole setup with plumbing, filter, inverter set us back an additional $300. Cheap when you consider a commercial setup is about $3500 - $4000 for equivilent performance. Vac hold down is awsome. Good luck |
#6
|
|||
|
|||
David it would be great if you could post the pictures of your setup, and the vac base you have done up
|
#7
|
|||
|
|||
You can't beat the price of a Harbor Freight dust collector when they are on sale.
|
#8
|
|||
|
|||
Irfan, I'm posting pictures on my build log right now. I'll update it over the next week or so to current progress which is pretty much complete.
|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Central Vacuum Motor | Ward Bartsch | The Market Place | 0 | Wed 22 April 2009 17:25 |
Vacuum Crane | sailfl | Miscellaneous / General / Whatever / Catchall | 0 | Fri 13 February 2009 20:12 |
Modifying a gas spring to make it pump-able | hans.arnell | 40. Z-Slide | 8 | Sun 04 January 2009 07:51 |
Hiccup with charge pump - since modified | Gerald_D | Archives | 6 | Fri 10 November 2006 04:37 |