MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > The Market Place
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Tue 30 September 2008, 09:36
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
A dust collector cyclone, ClearVue CV1800 LH, for sale in South Africa

Hi All

Recently I got a ClearVue CV 1800 LH for use in CamCraft's workshop for the 3 MechMates that will be running there:



The idea was to have automatic blast gates on the suction lines to each of the 3 machines, the blast gate opening when Mach switched the spindle on. However, the motor/blower/fan would be running almost continuously, even while only one table is active. On the other hand, only one cyclone on 3 tables might have been a bit light.

Have now decided to go for 3 smaller cyclones/blowers/motors, independent of each other, and each better matched for the 100mm [4"] suction hoses that we use (smaller cyclones around 300mm [12"] diameter instead of the 450mm [18"] , the CV1800, that was going to service all three pipes).

This ClearVue 1800 will be great for a workshop that wants to collect dust from more than just a MM.

I paid $490 [ZA R4000.00] for this cyclone in the US. Will sell for best offer above R2000.00. Still new in original box. Contact me at gerald(at)mechmate(dot)com
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 14:57.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.