MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > The Market Place
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Thu 08 May 2008, 01:08
ozanblotter
Just call me: OzanBlotter
 
Izmir
Turkey
80V @ 8A Microstep Drivers as Kit !!!

If you need drivers with following specs :

Max Voltage : 80V
Max Motor Current per Phase : 8A
Unipolar Microstep Drivers (6 or 8 Cable Motor)
Current Reduction (Saves Power %50 when there's no movement independently for each axis),
Full Step - Halfstep - 1/4 - 1/5 - 1/8 - 1/10 - 1/16 Microstep

And many other technical details, i supply them as kit including double sided PCB + Components + Videos + Documentation etc. :

http://www.sahibinden.com/microstep_...XQQdisplayitem

Each Driver is 360 $, but for friends over Mechmate Forum, below is my prices :

1 Driver : 240 $ (156 €uro)
2 Driver : 440 $ (286 €uro)
3 Driver : 600 $ (391 €uro)
4 Driver : 720 $ (469 €uro)

Also, there are interface boards and relay boards, two board works in parallel, so it's easy to connect them together just with 2x5 cable (i include cable,too). You can control anything with PWM and Relay Board, two color or one color LED connections, Switch connections etc.

And here is my LPT interface Board Prices as kit including PCB + Components + Documentation etc. :

4 Axis (or 3 Axis + PWM) : 120 $ (78 €uro)
Relay Extension Board : 120 $ (78 €uro)

Regards,
Ozan
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 15:10.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.