MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > General - MM Build
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Thu 25 January 2018, 14:56
Medemt
Just call me: Dan
 
Avon, IN
United States of America
Anyone ever built a 5 axis router

Not sure where to put this so if it is in the wrong area, please excuse.

I have been looking at a lot of 5 axis CNC router builds and was wondering if anyone here has put the two additional axis on a MechMate. I did a search for 5 axis and nothing came up. I can see where some have discussed a four axis machine.

I was particularly looking to have the 4th and 5th axis mounted to the Z axis slide. I did not want to have some added device mounted to the table or elsewhere.

Just wanted to see what might have been done by those building (have built) MechMates

Dan
Reply With Quote
  #2  
Old Fri 26 January 2018, 06:32
Tom Ayres
Just call me: Tom #117
 
Bassett (VA)
United States of America
Some of us have built 4th axis (rotary) and at one point talk of a 5 axis but I'm not sure if anyone has posted anything recently. I suggest taking a look through the builds.
Reply With Quote
  #3  
Old Fri 26 January 2018, 10:38
ger21
Just call me: Ger
 
Detroit, MI
United States of America
I think there's a 5 axis machine here somewhere, but it's a plasma cutter.
Reply With Quote
  #4  
Old Sun 25 March 2018, 18:48
pblackburn
Just call me: Pete #98
 
South-Central Pennsylvania
United States of America
Build and add a trunion and you have your 5 axis machine however the software to program one is extremely expensive. That is most likely the reason you have not seen one. A multi-positional head creates some dynamic forces that I think would require some engineering to the current model design.
Reply With Quote
  #5  
Old Fri 30 March 2018, 15:56
smreish
Just call me: Sean - #5, 28, 58 and others
 
Orlando, Florida
United States of America
4axis yes - 5....I found that it was cheaper and easier to buy a used Funac or other Robotarm for the same use.
Reply With Quote
  #6  
Old Sat 04 August 2018, 08:40
maxman
Just call me: Rory
 
Cape Town
South Africa
I tried it, and like the other posters said,

The problem is the high cost of software, Getting Delcam or mastercam to program a custom Kinematic post processor is very expensive.

definitley not hobby grade
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Built laser using buildlog.net sailfl General - MM Build 8 Tue 19 December 2017 18:08
And another MM will be built in Belgium bramvh Introduce yourself and start planning 9 Fri 15 April 2016 14:01
5 axis mechmate router? bluek20 Introduce yourself and start planning 11 Fri 06 May 2011 16:43
"Weak" z-axis won't plunge cutter - router turned off javeria Troubleshooting 30 Sat 14 November 2009 07:10
Two MM's being built in Delavan, WI and McHenry, IL Delamination Construction started, but not cutting yet 34 Mon 19 January 2009 07:32


All times are GMT -6. The time now is 08:38.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.