#1
|
|||
|
|||
OT …Trailer plans ?
Totally out of context, but… still steel fab !
Anyone knows a reliable source for safe & quality trailer plans? I’ll need some soon, as I plan to move out all my shop equipment & machinery ( Machmate too !!) to my new shop location by mid-end summer ! Looking for some other than this one ! Amicalement, Robert |
#2
|
|||
|
|||
Not sure your needs, but have you considered rentals like uhaul?
|
#3
|
|||
|
|||
What ??? Rent ??? When we can spend thousands of dollars and countless hours fabricating and purchasing single use tools for hundreds of dollars ????
Why rent we we can do all of that? But really http://www.tjtrailers.com/store/trai...lueprints.html If you really want to build I found this site on a Google search for Metal Trailer Plans |
#4
|
|||
|
|||
You could also check around and find out how Uhaul gets rid of their trucks. Often there's some major repair involved, but you can get them cheap.
|
#5
|
|||
|
|||
Rent….that’s good one !...better yet, renting a U-haul…never !!
Anyway, Thanks Mike, but as I pointed, looking for a "known reliable source". Google-ing does not follow in my specs of “reliable known source” May as well transfer this to the archives of simpler yet, delete it all...if you don't mind me ! Thanks anyway you guys for your time to my question! Amicalement, Robert |
#6
|
|||
|
|||
I've built many trailers, each one to suit the needs of the moment, and they all worked as they should have. I probably won't build another one. By the time you add up all the costs for all the parts and the costs to get the parts to where your going to build the trailer, that has to include the fuel when you go to the parts store to get that one piece you need now to continue, paint, sandpaper, tape, nuts bolts, nuts, wire, connectors, ect, plus the time to build it, I can go to Google and find someone near me that builds that trailer for not much more. If you could save big $$$$$, then I say build it yourself, otherwise if you do some research, just buy it.
If you do decide to build it anyway, do yourself a favor, keep detailed records of the cost and see how much more it would have cost to just buy the same trailer. Just my thoughts |
#7
|
|||
|
|||
Utility trailers are not that expensive. Often you can find good deals on used ones...
|
#8
|
|||
|
|||
Quote:
Building a 16' tandom axle trailer is not that hard. You can buy the 3000lb axles or the 7000lb axles and that works good. If you are hauling a heavy load you might want to get brakes. Axles As far as uhaul. Again I am not sure about Canada, but they are pretty good here in usa, but I personally perfer Ryder for the trucks. Your attitude might need adjusting also. After all, I was just trying to help. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Plans won't download? | Galt1x@comcast.net | About this Forum | 19 | Thu 06 November 2014 10:57 |
Mechmate plans in dxf format | tomasptacek | Profiled (laser cut) & bent steel plate | 11 | Sat 14 August 2010 09:07 |
FREE Plans | iqchallenged | Golden Resources | 0 | Fri 16 April 2010 11:14 |
A question on DWG Plans for MechMate | mark.haydock | Miscellaneous / General / Whatever / Catchall | 1 | Tue 09 September 2008 00:50 |