MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Common Assemblies & Parts > Motors & their mountings
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Sun 13 January 2013, 08:44
saas
Just call me: saas
 
ceje
Slovenia
I need advice

I need advice
I want to use this time to an un-geared Nema34 size stepper motor directly driving the pinion on the rack ..

I have a gecko 203 drivers

who could be the choice



tx
Reply With Quote
  #2  
Old Sun 13 January 2013, 15:32
saas
Just call me: saas
 
ceje
Slovenia
[QUOTE=saas;60286]I need advice
I want to use this time to an un-geared Nema34 size stepper motor directly driving the pinion on the rack ..

I have a gecko 203 drivers

who could be the choice



actually I would take M1343031 but it worries current of 7.1 A / phase while gecko 203v 7A provides max!?

tx
Reply With Quote
  #3  
Old Mon 14 January 2013, 15:41
danilom
Just call me: Danilo #64
 
Novi Sad
Serbia
Set it as 7A and have no worries, on some drives the "steps" between current presets are 0.5A and it does not affect the motor too much.
With plenty of torque 6.8Nm you can spare a little and even derate a motor a little, with current set to 6.5Amp
Reply With Quote
  #4  
Old Mon 14 January 2013, 16:45
MetalHead
Just call me: Mike
 
Columbiana AL
United States of America
I know I responded to this. But do not see it .... hmmmm

M1343020 - This motor aligns more to some of the other motors at 623oz that we use in the build for both direct drive and belt drive.

The other motor is over 960 oz in. and is a lot longer than the other motor.
Reply With Quote
  #5  
Old Tue 15 January 2013, 03:09
saas
Just call me: saas
 
ceje
Slovenia
I can not believe

manufacturer changed data after two days





Reply With Quote
  #6  
Old Tue 15 January 2013, 03:44
saas
Just call me: saas
 
ceje
Slovenia
although we now agrees M1343031

tx you
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rfid advice Leko Miscellaneous / General / Whatever / Catchall 3 Fri 27 July 2012 01:13
Advice on Wantai Motors jehayes Motors & their mountings 6 Wed 20 January 2010 04:41
Advice on Proximity Sensors jehayes 70. Control Systems 2 Sat 12 December 2009 17:11
Desperately in need of sound advice. spider56 Archives 6 Fri 01 February 2008 13:53
Stepper Advice Bumole Motors & their mountings 2 Fri 14 December 2007 00:27


All times are GMT -6. The time now is 06:44.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.