MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > After Building the Beast - Operating , Troubleshooting and Maintenance > Cutting various materials - bit selection, feeds, speeds
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Fri 24 July 2009, 09:12
hennie
Just call me: Hennie #23
 
Roodepoort JHB
South Africa
What type of cutter to use and what feeding speed to cut aluminium

I had to cut some 3 mm aluminium today and what a disaster.Can anybody that did this type of cutting please give me advice on what type of cutter and the feeding speed and at what speed my cutter needs to turn.Must say a MM can bend aluminium.
Reply With Quote
  #2  
Old Fri 24 July 2009, 09:24
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Routing or cutting aluminium
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:30.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.