#1
|
|||
|
|||
just now started bought the electronics
hi my name is raj i am mechatronics student. this is my first 3 axis cnc going to build. my machine going to be a small one about 500*500mm of working space. thats enough for me. i just going cut few mdf woods.
last week only i purchased a cnc kit from wantai motor. spec of the motor is 3.7v 1.7a/phase 56oz holding toruqe. i know how to wire everything except one thing, power supply that i got is 24v 8.3 amp, driver can handle between 12 - 36v dc, less than 2 amp current is it fine to pulgin in 24v 8.3 amp to the driver's port for motor's power????? if i pulgin will it destroy the driver and motor !!! |
#2
|
|||
|
|||
Raj
This site is dedicated to building the MechMate. Sounds like your machine is pretty small. You will want to check out www.cnczone.com for machines that size. Our smallest machine is about 4x4 feet. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Finally bought the plans | nsfr1206 | Introduce yourself and start planning | 36 | Mon 28 January 2013 16:09 |
Bought the MechMate Plans - Time to get Started | bkgoddard | Introduce yourself and start planning | 5 | Tue 08 November 2011 06:32 |
Just bought the plans - Andover, MA | ben1272 | Introduce yourself and start planning | 5 | Mon 12 September 2011 12:34 |
Bought Linear Rails, Help mounting (non-MechMate) | shelbygt500buddy | Archives | 4 | Sun 29 November 2009 20:07 |
Bought my first part - Ogden UT | David Smith | Introduce yourself and start planning | 2 | Tue 24 April 2007 21:13 |