Another MM is born !!! #128 - São Paulo BR

[Antonio Lima]

Hello everyone!

I am from São Paulo Brazil, I work for thirteen years in the furniture industry.
Four years ago I started researching the construction of a CNC router, started building my Mechmate in January 2016, the mechanical part is already finished
and I'm getting some electronics now.

Cutting area X2600 Y1700 mm.

[Kornerking]

Kool.
We shall watch your progress.

[sierra347]

Everything looks great, you'll be cutting in no time.

[MetalHead]

Wow,

Looking great !!

[IamDave]

Very Nice Looking rig

[Antonio Lima]

Thanks everyone!

[Antonio Lima]

Next weekend I will work hard on the project and soon I will share new photos with the assembly details.

[Antonio Lima]

I finished the assembly and alignment for at least two months. The panel box is small but, everything is working.
Despite the warnings, I set up the frequency inverter inside the panel, did several tests and still had no problems.

[Antonio Lima]

Cut 54 circles Ø900x9mm MDF, are not all in the picture.

[Antonio Lima]

Cutting corian®, some images about cut quality.
The cut is slightly serrated, the results are satisfactory for the cutting of wood in general. The groove in the picture is 6x3mm.

[Antonio Lima]

Manufacturing a RC airplane motor cowl mold.

The video link, https://youtu.be/ae-kjlu-gVE

Thanks everyone.

[MarkRH]

Congrats Antonio, must be nice to see it cut the first time!
Are you using direct Drive? And mach3?

[Antonio Lima]

I'm using Mach3 and direct drive.
Mach3 Version R3.041
Rack and Pinion module 1

The machine works smooth, fast and continuous. Do not stop while running the lines.

[Antonio Lima]

Cutting area - 2600x1700 millimeters
Rack - module 1
Pinion - module 1 (Z24 teeth)
Laser cutting and folding - http://www.blankinox.com.br/ (Osasco-São Paulo - Brazil)
Bearing RM3ZZ / W3 - Chinese

Electrical and electronic parts:

Power supply of the control box - 220v
Step Motors - Nema 34 Model (KML092-F07F) 60kg.cm, wiring in series (without reduction gears)
Drivers - Gecko G201x
Toroidal Transformer - 560VA (80V 7A)
Breakout board - CNC MACH3 USB 4 Axis 100KHz USBCNC Smooth Stepper Motion Controller (Chinese)
Spinlde - Model Tecmaf TFS.3Z3M.01 / 2200KW (3HP) ER20
Frequency Inverter - WEG CFW300

Limit switches and buttons, operate with 12V power supply

[MetalHead]

Congrats on your build!! You get #128 - Hope this inspires all those watchers out there to get moving a build their own MechMate !!

[jhiggins7]

Congratulations, Antonio, on earning Serial #128. Here is the Updated Builder's Log. Please check your entry for any changes you would like to make.

[lonestaral]

Well done #128.
Have fun.

[Antonio Lima]

Thanks Gerald, Mike for the number, John # 26 to update builders log, To Al # 114, and the other members of the best forum about router cnc in the internet. I will put the number in the machine.

Thanks so much!

[Antonio Lima]

One more job with Mechmate.
Custom guitar PRS 22 frets for left-handed.
https://youtu.be/zwjS12HiXdk

[IamDave]

Nice. That is awesome.

[oficina do corten]

Congrats! VERY NICE JOB, a real inspiration for us brazilian fans of the Mechmate. After this I have to restart my project.

[racedirector]

Congrats on 128, you should be proud of your work.

Real nice job on the guitar, one of those is on my list of things to do.