|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
|
Thread Tools |
#31
|
|||
|
|||
...all those work. Be careful, porous sheets (like MDF and cellulose) will often pick up 1, 2 or 3 sheets at a time.
Melanime and plywood, respectively in the videos are fairly NON porous and will grab only 1 sheet at a time. ....for what it's worth. Sean |
#32
|
|||
|
|||
Sean I think Pmk was talking about the front loader found here http://www.woodmotion.com/front_loader.php
No vacuum just mechanical lift. |
#33
|
|||
|
|||
#34
|
|||
|
|||
mm that can be a great add-on for my employee.
anyone know if a vacumm pump like this will be enough. with a small tank. like 120 -200 liters per minute depends on the model. |
#35
|
|||
|
|||
Nope this is not even close. This is a low flow high vacuum type. you need at least medium flow type to compensate for the vacuum lost through mdf porosity & other leakages.
|
#36
|
|||
|
|||
It does sound like he is using a Venturi and some kind of Air driven drive to lift the sheets. Both should be availible for much cheaper than the pump.
|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
Thread Tools | |
|
|