|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
|
Thread Tools |
#1
|
|||
|
|||
Tales of dust in Texas - Dallas TX USA
We started construction yesterday on our 5' x 10' table. We are using 3" x 8" x 1/4" square tube for our main beams, 2 1/2" x 3/16" sq tube for the legs and bracing. It will be a little beefier than called for but weight is not an issue for us as we have lots of liffting devices. We are going to try for first cut within 4 weeks. That may be optimistic, but it's something to shoot for. I'll try to post pics along the way.
|
#2
|
|||
|
|||
Welcome to the world of MM.
I am certain you will do fine. 4 weeks is a very good estimate if your devoting your normal work days to the project. Keep us posted! |
#3
|
|||
|
|||
Welcome Kart!
|
#4
|
|||
|
|||
A little longer than we thought but we made our first cut today. I'll try to get some pics up soon.
|
#5
|
|||
|
|||
That's Great !!! Can't wait to see pictures !!!!
|
#6
|
|||
|
|||
Congrats looking forward to the pictures.
Last edited by Regnar; Wed 21 December 2011 at 16:16.. Reason: To many beers and didnt read enough. |
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New Member from Texas | fergi | Introduce yourself and start planning | 5 | Thu 05 May 2011 12:48 |
West Texas Build | wjaggars | Introduce yourself and start planning | 5 | Thu 26 August 2010 05:00 |
truecnc.com - Houston, Texas | dmoore | Archives | 68 | Fri 21 August 2009 11:34 |
Dust-proofing stepper motors and consequences of dust ingress | Doug_Ford | Motors & their mountings | 25 | Thu 08 November 2007 19:09 |
Mechmate - Austin, Texas | Les Filip | Construction started, but not cutting yet | 9 | Mon 20 August 2007 23:07 |