MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Personal Build Histories > MechMates already cutting
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Sat 11 July 2009, 05:18
AuS MaDDoG
Just call me: Tony #71
 
Brisbane
Australia
Making Bar Signs! #71 - Brisbane, Australia

Hi,

Quick introduction, as I have got so much reading to do!!
I am totally new to this sort of thing and come from a Shopfitting Joinery background but with no CNC experience. I am looking forward to the journey, just need to find my way before taking my first steps.
Looking to mainly wood carving and acrylic fabrication, anyway enough for now and feel free to throw any advice this way.

Cheers
Tony.
Reply With Quote
  #2  
Old Sat 11 July 2009, 05:49
sailfl
Just call me: Nils #12
 
Winter Park, FL
United States of America
Tony,

Welcome.

Print off the plans and start reading the threads. You will learn as you read and you need the plans for reference.

Good luck.
Reply With Quote
  #3  
Old Sat 11 July 2009, 06:31
AuS MaDDoG
Just call me: Tony #71
 
Brisbane
Australia
Hi,

Plans were the first thing I downloaded reading some of the threads now on some of the Australian builds that are currently underway, just so much to take in, but thoroughly enjoying the experience.

Cheers
Tony.
Reply With Quote
  #4  
Old Mon 20 July 2009, 18:50
AuS MaDDoG
Just call me: Tony #71
 
Brisbane
Australia
Control Panel

Hi,

Purchased my control panel last night, which is my first purchase towards getting my Mechmate underway.
Such a great buy I could not resist, guess that's me hooked now!! lol.



Screen is a touch screen and after loading Mach3 onto the computer last night all worked a treat. There is also heaps of room in the metal cabinet for all the other electronic equipment so this should do the job well.



Guess I need to start ordering some laser cut parts, steel and electronic equipment now so I can put this control panel to some good use.

Cheers
Tony.
Reply With Quote
  #5  
Old Mon 20 July 2009, 23:10
Kobus_Joubert
Just call me: Kobus #6
 
Riversdale Western Cape
South Africa
Send a message via Yahoo to Kobus_Joubert Send a message via Skype™ to Kobus_Joubert
I wish we could get those here in South Africa at a good price I must add.
Reply With Quote
  #6  
Old Wed 22 July 2009, 04:52
javeria
Just call me: Irfan #33
 
Bangalore
India
Ah that's a lot sweeter than my cabinet! can we see how the interiors look??? i think its dust free interiors right??
Reply With Quote
  #7  
Old Wed 22 July 2009, 05:09
AuS MaDDoG
Just call me: Tony #71
 
Brisbane
Australia
I will get some pics up for you soon!!
Cheers
Tony.
Reply With Quote
  #8  
Old Wed 22 July 2009, 19:54
AuS MaDDoG
Just call me: Tony #71
 
Brisbane
Australia
Check this thread for internal photos of the control panel my friend Paul has one also.
http://www.mechmate.com/forums/showthread.php?t=1870

Cheers
Tony.
Reply With Quote
  #9  
Old Tue 28 July 2009, 01:52
AuS MaDDoG
Just call me: Tony #71
 
Brisbane
Australia
Hi,

My MM is now underway with some good news from Rick, my laser cut parts are underway.
I have also decided that my MM will be made to take a 2440mm x 1220mm sheet size, so now I just have to work out what size/length all my steel needs to be.
I will also be looking to start purchasing Motors, Gecko's, BOB, and still looking at spindle/router options.

Cheers
Tony
Reply With Quote
  #10  
Old Tue 28 July 2009, 21:14
AuS MaDDoG
Just call me: Tony #71
 
Brisbane
Australia
Hi,

So with regards to the lengths and widths of the steel I will be using on the table, do I use the drawings and just add the X and Y size of my sheet to the additional sizes noted on the drawings, or is there someone that has already worked out all the metal sizes based on a sheet size of 2440mm x 1220mm that can help me out ??

Thanks for any help and advice.

Cheers
Tony.
Reply With Quote
  #11  
Old Wed 29 July 2009, 00:17
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Quote:
Originally Posted by AuS MaDDoG View Post
do I use the drawings and just add the X and Y size of my sheet to the additional sizes noted on the drawing
Yes, that is the intention, and it seems to work.
Reply With Quote
  #12  
Old Wed 29 July 2009, 02:14
AuS MaDDoG
Just call me: Tony #71
 
Brisbane
Australia
Thanks Gerald,

I just wanted to be sure as I have never taken on a project of this nature let alone steel work before.
I guess my next step would be to workout a cutting list for each of the steel types, so that I know how many meters of each I need, then source what is available locally.
If anyone in Aus has already done a cutting list for the table based on the sheet size I am working too, please feel free to chip in.

Cheers
Tony.
Reply With Quote
  #13  
Old Mon 10 August 2009, 06:01
David T.
Just call me: David T.
 
Melbourne, Victoria
Australia
Tony (AuS MaDDoG) & Paul (Skippy),
This post maybe just too slow, but I need to ask the question, I'm a "Mexican" from down south (Melbourne) seeking assistance from a bender (banana) in tracking down one of those free standing computer consuls, either type will do.
Can either of you point me in the right direction, hopefully in Melbourne, as the freight from Brisbane would possibly double the cost, I would appreciate your help.
Thank you and Regards
David T.
Reply With Quote
  #14  
Old Mon 10 August 2009, 17:38
AuS MaDDoG
Just call me: Tony #71
 
Brisbane
Australia
No Worries David,

Info as requested, good luck in tracking one down!!

There are 2 versions available, they are advertised on ebay

version 1

15" Touch Screen LCD Kiosk System with External Keyboard/Trackball

Unit comes with a SFF Desktop PC inside:
Intel Celeron 2.00GHz
256MB DDR
40GB Hard Disk.
CDROM, Wifi
Microsoft Windows XP Pro COA.
External Keyboard with trackball mouse.
15" Touchscreen Panel EFL-1501X.
Swecoin TTP 8200 Kiosk Thermal Printer.
Built-in Surge protection.
Front mounted headphone Jack.
Dimensions: (H x L x D): 116cm x 69cm x 76cm.

version 2

15" Touch Screen LCD Kiosk System

Unit comes with a SFF Desktop PC inside:
Intel Celeron 2.00GHz
256MB DDR
40GB Hard Disk
CDROM, Wifi
Microsoft Windows XP Pro COA
Keyboard included for maintenance and setup.
15" Touchscreen Panel EFL-1501X
Swecoin TTP 8200 Kiosk Thermal Printer.
Built-in surge protection.
Front mounted headphone Jack.
Dimensions: (H x L x D): 135cm x 69cm x 63cm

Computer Source Australia Pty Ltd

(02)9746 1966

We send Australia wide. Please enquire for quote.
Pick up welcome from the following locations:
Sydney: Homebush Bay
Melbourne: Braeside
Brisbane: Stafford
We have 100+ in stock.
Reply With Quote
  #15  
Old Wed 12 August 2009, 04:56
AuS MaDDoG
Just call me: Tony #71
 
Brisbane
Australia
Update!!

My friend Paul (Skippy) and I are both in the planning and purchasing stages of our MM build.
We both have our control panels, including touch screens, Paul has his laser cut and bent parts and I am waiting on mine arriving from Rick. Paul recently ordered our motors which should arrive within the next couple of weeks.
In the meantime not being familiar with what is available in steel I have found the following sections appear to be available, however I am not sure if it is too heavy or not, so any help would be appreciated as I do not want to over or under do things.
Once I have this finalised I will draw the table up in cad and produce my cutting list.

Steel & Spec's
Table legs to be 75 x 75 x 6mm Box 6 off 7.32 Kg/m
Rails & Bracing to be 50 x 50 x 6mm Box 12.0 Kg/m
Y cross bearers to be 75 x 40mm Channel 6.1mm Flange & 3.8mm web 5.92 Kg/m
Main Longitudnal Beams 200 x 75mm Channel 12mm Flange & 6mm web 22.9 Kg/m
X and Y rail angles 65 x 50 x 6mm 5.16 Kg/m
Y axis gantry rails 100 x 50mm x 2mm Box 4.5 Kg/m

If anyone can see any issues with the above please let me know asap.

Cheers
Tony.
Reply With Quote
  #16  
Old Wed 12 August 2009, 06:18
David T.
Just call me: David T.
 
Melbourne, Victoria
Australia
Hi Tony,
Thank you for the info on the Kiosk Computers, unfortunately I was too slow as there are no more available, maybe next time I will be quicker.
Regards
David T.
Reply With Quote
  #17  
Old Wed 12 August 2009, 18:06
MattyZee
Just call me: Matt
 
Adelaide
Australia
Hey Tony,
Thats list of steel sections looks very close to what i used except you are going for a heavier wall than me.
The only differences to what i used are:
70x70x3 (legs) (may have been 75x75x3?)
50x50x2.5 (bracing)
180x75 PFC for the (main rails) (11mm flange, 6mm web, 20.9kg/m)

You list looks good though i don't think you will need 6mm wall thickness for the leags and bracing. Mine is rock solid and weighs enough as it is!

Last edited by MattyZee; Wed 12 August 2009 at 18:10..
Reply With Quote
  #18  
Old Wed 12 August 2009, 20:42
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Those legs and bracing will be okay at 4mm wall thickness.
Reply With Quote
  #19  
Old Wed 12 August 2009, 20:56
MattyZee
Just call me: Matt
 
Adelaide
Australia
are you implying i went too thin Gerald? I think 3mm is plenty...
Reply With Quote
  #20  
Old Wed 12 August 2009, 21:19
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
A guy who was thinking of 6mm won't half it to 3. Then 4mm sounds like a nice number without losing face.
Reply With Quote
  #21  
Old Wed 12 August 2009, 23:00
AuS MaDDoG
Just call me: Tony #71
 
Brisbane
Australia
Thanks for the responses, much appreciated!!
Like I said I have no idea when it comes to steel or sizing, I just read a couple of times heavier appeared to be better
The steel I sourced mainly to get the sizes and to seek your recommendations as too whether it was too heavy or not??
If 3mm thick wall on the legs and bracing will do the job, and do it well, then 3mm it is!! as it will probably save us a few $$ as well as my back which is not as good as it used to be

Thanks for the info guys!! now to start my drawings and cutting list / takeoffs.

Cheers
Tony.
Reply With Quote
  #22  
Old Thu 13 August 2009, 01:01
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
I am trying to be a diplomat here. . . . go thicker than 3 if you can.
Reply With Quote
  #23  
Old Thu 13 August 2009, 01:50
MattyZee
Just call me: Matt
 
Adelaide
Australia
I hear you Gerald, loud and clear!

Just to prove i didn't wing it, Beam stiffness is a function of elastic modulus and cross section moment of inertia. Given we are considering the same material it comes down to cross section.

Legs as per Drg 10 10 332
75x40 parallel flange channel
Ixx 6.83x10E-7m^4
Iyy 1.20x10E-7m^4

compared to 75x75x3
Ixx=Iyy=7.16x10E-7m^4

Long Braces as per drg 10 10 312
50x4 Circular hollow section
Ixx=Iyy 1.54x10E-7m^4

compared to 50x50x3
Ixx=Iyy 1.95x10E-7m^4

So the 3mm wall should still be stiffer than the drawings require
Reply With Quote
  #24  
Old Sun 16 August 2009, 07:05
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Matt, your table will be good. Realise that we are not looking for bending stiffness of the legs and associated parts, so the I factors are not really relevant there. We are looking mainly for plain old mass. But your masses also calculate out okay.
Reply With Quote
  #25  
Old Sun 16 August 2009, 22:24
AuS MaDDoG
Just call me: Tony #71
 
Brisbane
Australia
Hi,

My laser cut parts from Rick arrived today Thx Rick!!
Parts were very well packaged and look great!!
Slowly getting there, Once I get the steel all sorted out for the tables we should start to see some serious progress with Paul (Skippy) and my MM's
Can't wait to get this show on the road so to speak!!

Will post some pics later.

Cheers
Tony.
Reply With Quote
  #26  
Old Mon 17 August 2009, 02:27
AuS MaDDoG
Just call me: Tony #71
 
Brisbane
Australia
Hi All,

As promised here are the photos of my laser cut parts I received from Rick today, thanks Rick they look to be of great quality!!

Well boxed as you can see.



Well packaged too.



Parts after I removed all the packing materials and bubble wrap.





Cheers
Tony.
Reply With Quote
  #27  
Old Tue 18 August 2009, 05:34
skippy
Just call me: Paul #72
 
Queensland
Australia
Tony

Rick's laser cut parts look ready good, I see that he packed the same way that he sent them to me Which was great. Looks like that we got the new roller skate version, I might need to use yours instead on mine.

Regards
Paul
Reply With Quote
  #28  
Old Tue 18 August 2009, 08:00
AuS MaDDoG
Just call me: Tony #71
 
Brisbane
Australia
Haha!!

No worries Paul, I'm sure it will do the job for the both of us!! I should be able to borrow one of those Makita metal saws for cutting down the angle rails too, which should help speed the machining process and make the grinding of the V process much easier.

Cheers
Tony.
Reply With Quote
  #29  
Old Tue 01 September 2009, 02:16
AuS MaDDoG
Just call me: Tony #71
 
Brisbane
Australia
Hi All,

Update:- Our motors have arrived in Aus from Canada with one box of 5 recieved, and the other box of 5 in customs

I have done this drawing just to get some idea as too where I am heading with the table length, and thought I would post it up for comment, and for my peace of mind that it is right.

As said before the sheet size I am planning to work around is 2440mm x 1220mm. I think I have the correct sizes for the length of the table and once I am sure this is right I will work on doing a drawing for the width.



Look forward to your comments.

Cheers
Tony.
Reply With Quote
  #30  
Old Tue 01 September 2009, 04:14
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Tony, that looks right, with your "home" end at the left.

I presume that you will be using a cable chain for the X? We use a harness/umbilical hanging from under the table to the end of the gantry, but then we need a space where you have the center leg.
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Making Skins #74 - Brisbane Australia Surfcnc MechMates already cutting 1078 Sun 20 September 2015 11:05
Touch Probes Have Arrived #72 - Brisbane, Australia skippy MechMates already cutting 130 Mon 04 March 2013 04:31
Do my legs look fat? - Brisbane Australia tangocharlie123 Construction started, but not cutting yet 60 Wed 22 June 2011 06:32
New member - Brisbane Australia stan stuart Introduce yourself and start planning 3 Tue 11 May 2010 20:48
Commercial Signs Hugo Carradini The Show Room 17 Wed 21 January 2009 22:51


All times are GMT -6. The time now is 01:38.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.