MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Structure & Mechanics > 55. Dust Management
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Sat 02 May 2009, 05:12
sailfl
Just call me: Nils #12
 
Winter Park, FL
United States of America
Dust Collection Ground Wire

I am currently working on my dust collection duct system. I am currently planning of running a ground wire on the inside of the PVC and flexible hose. I am attaching the wire inside the PVC pipe that will be riding on my Z. At the dust collector end, I was going to screw the other end to the dust collector.

Will this work or do I need to attach the wire to the Z? I was thinking that I did not want to do that.

Comments!
Reply With Quote
  #2  
Old Sat 02 May 2009, 07:36
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
We have always made sure that the wire is positively attached to a part of the dust collector that is grounded/earthed to the building's ground/earth point via the dc's supply cord.

As for the other end of the wire, ours has been touching the painted metal of the z-axis (wire is bent around the end of the hose and anchored in the hose-clamp). My thinking is that we have a very solid ground/earth cable already tied to a clean point on the z-axis and that is a "superior" ground/earth to anything else that may inadvertantly touch the axis. However, the purist reasoning for avoiding ground loops says the dc wire must not be connected to the z-axis.
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 18:05.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.