MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > After Building the Beast - Operating , Troubleshooting and Maintenance > The Show Room
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Sat 22 August 2009, 05:26
javeria
Just call me: Irfan #33
 
Bangalore
India
Mirror frame

a mirror frame - v carving

3 tools used

1. 90 deg v tool
2. half rounding tool 12mm dia
3. 8 mm endmill for profile cut
Attached Images
File Type: jpg 72.jpg (122.5 KB, 1977 views)
File Type: jpg 73.jpg (99.6 KB, 1969 views)
Reply With Quote
  #2  
Old Sat 22 August 2009, 19:38
domino11
Just call me: Heath
 
Cornwall, Ontario
Canada
Irfan,
Looks like you are really getting good with the MM. Very nice!
Reply With Quote
  #3  
Old Sun 23 August 2009, 05:25
javeria
Just call me: Irfan #33
 
Bangalore
India
Thanks Heath
Reply With Quote
  #4  
Old Sun 23 August 2009, 06:23
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
I can't help but giggle at the number of times we have seen Irfan's toes in pictures . .

Still a nice frame though.

For "half-rounding" we find that a router table (motor hung under) is better than a CNC - it makes the depth control easier.
Reply With Quote
  #5  
Old Sun 23 August 2009, 06:58
javeria
Just call me: Irfan #33
 
Bangalore
India
if you get the hang of doing the half rounding on the cnc - nothing like it.
Reply With Quote
  #6  
Old Sun 23 August 2009, 07:10
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
It is not a case of getting the hang of it, it is a case of getting perfectly consistent board thickness. We will talk again after you have finished an order for 200 frames . . . . . . .
Reply With Quote
  #7  
Old Mon 24 August 2009, 04:59
KenC
Just call me: Ken
 
Klang
Malaysia
Gerald, you mean to say that you use router table to finish off some of your orders?
Reply With Quote
  #8  
Old Mon 24 August 2009, 05:57
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Yes. But only for doing the quarter-rounding. It is much more cost & time efficient this way.
Reply With Quote
  #9  
Old Fri 30 March 2012, 07:10
keithstanley
Just call me: Keith
 
Flintshire
United Kingdom
Beautiful work Irfan. Can I ask where you got / get those swirls and patterns you cut into the frame? Or do you generate them yourself? If so can you advice me how it is done?
Thanks,
Keith
Reply With Quote
  #10  
Old Sat 31 March 2012, 12:10
javeria
Just call me: Irfan #33
 
Bangalore
India
No Keith, i find those patterns on the internet, where I don't exactly remember !

I just use a quarter pattern, work on the vectors then mirror them around.

Irfan
Reply With Quote
  #11  
Old Fri 14 December 2012, 13:29
keithstanley
Just call me: Keith
 
Flintshire
United Kingdom
Thanks for that info Javeria, I guess I will start looking too.

I note with interest that the posting from Artline3D was moved, probably because it was advertising not sharing. Was the posting deleted or simply moved to another location? If it was moved where would I find it again please?

Thanks
Reply With Quote
  #12  
Old Fri 14 December 2012, 14:53
domino11
Just call me: Heath
 
Cornwall, Ontario
Canada
Check the Marketplace. That is where all the business posts are!

3d models for cnc

If you are looking for a relatively new post, at the top of each thread is a link to the

Last 1 | 3 | 7 Days

of posts.
Reply With Quote
  #13  
Old Fri 14 December 2012, 17:10
keithstanley
Just call me: Keith
 
Flintshire
United Kingdom
Thanks!
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
1020400W Gantry Frame Welding instructions Gerald_D 20. Gantry 7 Sun 06 February 2011 02:29
Cutting mirror frames - Coimbatore,India vishnu MechMates already cutting 95 Mon 17 August 2009 08:31
Frame for Oil Painting Khalid Archives 2 Sat 18 July 2009 10:55
Same torque, different sized frame chrisd7306 Motors & their mountings 5 Wed 19 November 2008 02:25


All times are GMT -6. The time now is 00:16.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.