|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
|
Thread Tools |
#1
|
|||
|
|||
Hello To One and All
Hi New To CNC
I Have a 10"x 5" gantry CNC Router i got from the USA. it has never worked i have now put in new break out boards and rewired it, it Now Work With a few faults which i an trying to work out it is running under mach3, which i find to be hard work. Well Thanks Mick |
#2
|
|||
|
|||
Welcome to the site. Did you mean 5 foot x 10 foot? Is it a MechMate? You should be able to do some research here around Mach 3. Everthing here is focused on the MechMate.
|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
Thread Tools | |
|
|