MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Archives
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Closed Thread
 
Thread Tools
  #1  
Old Tue 28 August 2012, 13:16
agfmaquinas
Just call me: agfmaquinas
 
Toledo
Brazil
Not loosing steps but???

Hello every one:
Y have a cnc machine with rack and pinions,if i cut a 10 pcs of 100X100,y have one 100,another whit 99.....The strange is that the machine dont loose steps,it can cut for a hour and the machine come to home exactli.
Can some one help-me please.
Thanks
  #2  
Old Tue 28 August 2012, 14:42
domino11
Just call me: Heath
 
Cornwall, Ontario
Canada
Have you checked for a loose pinion gear? Its also a good idea to have two set screws 90 degrees apart. If you do not have two flats on your shafts, grind the second flat for the second set screw 90 degrees to the first.
  #3  
Old Tue 28 August 2012, 15:17
MetalHead
Just call me: Mike
 
Columbiana AL
United States of America
Is it a MechMate?
  #4  
Old Wed 29 August 2012, 05:05
agfmaquinas
Just call me: agfmaquinas
 
Toledo
Brazil
Hello Mike,no its not a mechmate,but the rack and pinion itīs basicly the same think.When i made it i dont know about mechmate.....sorry.
Closed Thread

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Loosing Steps - underpowered ? Claudiu Troubleshooting 24 Thu 18 February 2010 13:53
Motors loosing steps - Breakout board not suitable mgandy02 Troubleshooting 17 Mon 02 November 2009 10:01
All motors run fine then start chattering and loosing steps - interrupt in the PC KevinL Troubleshooting 24 Wed 14 October 2009 21:11
Loosing steps - noise interference problems MariusL Troubleshooting 14 Sun 15 March 2009 05:34
My introduction - the first scary steps - Miami Florida thesaent14 Introduce yourself and start planning 11 Sun 16 September 2007 13:01


All times are GMT -6. The time now is 05:51.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.