![]() |
#1
|
|||
|
|||
Laser Cut and Bent Parts - United States
MetalHead now supplies these parts !!!
Let MetalHead know if you need MechMate parts in the United States !!! Laser Cut and Bent Parts Machined Parts Other MechMate Parts Just send me a PM or an email and I will get you what you need. Mike |
#2
|
|||
|
|||
Do you have two extra sets available? I am sitting here trying to figure out how to reduce the costs with the quotes I've gotten, and in the balance between getting the experience of sourcing parts vs getting the thing built, I am starting to lean heavily towards actually doing something.
|
#3
|
|||
|
|||
parts
Travis, I ordered about 5 extra sets this time. Two of them are yours. Just PM me your info so I can figure what the shipping will be to you.
Joe |
#4
|
|||
|
|||
What is the net weight of all the parts? I want to have a cost reference with parts done locally. Thanks
|
#5
|
|||
|
|||
Got the parts today. Thanks Joe.
UPS managed to damage the car main plate, but it should be fixable. |
#6
|
|||
|
|||
Hey Joe - there are always ways to improve, which is what makes engineering, building things and just doing stuff fun.
For me, the minor inconvenience of a few dings is well worth it. The best quote I got for two sets was $760/set, of unknown quality (they probably would've been fine, but you never know until you actually order). So I appreciate what you are doing, because it has helped me over a big hurdle towards the finish line of making dust! My buddy who is making the other MM is a mechanical guy (I am electrical/software), and he was impressed with the quality of the parts and with the design. |
#7
|
|||
|
|||
...okay - I welded the gantry for Nils machine today. The fit on your parts joe is outstanding. I hate admitting the machine I am helping build is better than my own
![]() |
#8
|
|||
|
|||
parts
I'll make sure that gets back to the Laser/ fabricators that I use.
Joe |
#9
|
|||
|
|||
Joe,
Thanks again for the great parts. The gantry looks very sharp because the parts fit together so well. Yes, please tell your supplier that we like what they are doing. |
#10
|
|||
|
|||
thanks for the parts Joe, they came in pristine condition (with a set of bearings included?)! your laser cutter did an excellent job, looking forward to putting these to use!
|
#11
|
|||
|
|||
awesome parts
parts are beautiful. "snap" together perfectly. definitely a good investment and time saver. thanks again
|
#12
|
|||
|
|||
Quote:
You are right Gerald on the cost break-up which i have not added. I had quoted them for indication purpose only and not for commercial puposes, its for our builders to have an idea on the pricing. Vishnu |
#13
|
|||
|
|||
Joe,
Received the parts. Everything looks good and high quality. Thanks for all your help and hard work. Got a chuckle out of the "Fragile - Handle with Care" stickers. ![]() |
#14
|
|||
|
|||
parts
That is the only way I can keep the UPS Guys from dropping the boxes. I am working on getting a double walled corrugated box produced, so there is no rattle room.
I should get them next week. ![]() I still have a few more sets available. If anyone is interested, send me a PM with all of your shipping info. |
#15
|
|||
|
|||
Note to self: Have to bear in mind that there is a special box - cannot casually increase the big dimensions in later revisions
![]() |
#16
|
|||
|
|||
Joe,
Just for your reference: The shipping box was is great shape. If all shipments were in the same shape, I wouldn't change a thing. |
#17
|
|||
|
|||
The box I was using was a standard size box that I could order off line.
With the last revision to the Y-car pushed me out of the box. The next size that I could find was too big in every direction. hence I had to seek out a local box maker. The price per box is about $2 more. It is that 1% that writes back to say that something was bent during shipping(but was fixable), to make doing this worth while. |
#18
|
|||
|
|||
Sorry about that
![]() (folded lip for the pushbutton box) |
#19
|
|||
|
|||
Gerald,
Oh well, I think it is worth it for the tab? I guess I will have to figure out a way to ship those too. ![]() Last edited by domino11; Sun 28 September 2008 at 18:07.. |
#20
|
|||
|
|||
Hi joe riz from lowell ma was woundering if you could hook me up with the contact info to buy the laser and bent parts for the mechmate a phone # or webb address would do thanks riz
|
#21
|
|||
|
|||
Laser Cut Parts
Riz,
I have three more sets to sell. ![]() Joe |
#22
|
|||
|
|||
I want the laser cut & bend set anyone can help? please
Im in Sonora, Mexico . PM me |
#23
|
|||
|
|||
Joe just recieved the laser cut parts today.WOW! I am very impressed. Not one damaged and the quality is excellent.thank you again riz
|
#24
|
|||
|
|||
Conrado talk to( jmbclain) I just recieved the laser cut parts from joe in sweet home alabama. I think he may have some kits. The quality is excellent. Hope this can help you. riz
|
#25
|
|||
|
|||
Laser Cut Parts
Riz,
I’m glad that everything arrived in tact. I made another order today. So, those thinking of starting their MM, Parts will ready in a couple of weeks. For those people who are interested, Please email me all your shipping address info. so I can calculate shipping charges. Unfortunately, shipping outside the U.S. cost waaaaaaaaaaay to much. The people at the UPS store said that the weight was the thing that is killing me. ![]() Joe |
#26
|
|||
|
|||
Hi Joe...
I ordered the parts from you on may...i left the project in stand by but now I ready to start, the parts you send me where i think mamba parts, i just want to know if the parts are the same as the newest sets or if there has been changes? Kindest Regards, Hector |
#27
|
|||
|
|||
Hi Joe:
I wonder how much is waaay to much. I think i can handle it, I have not seen another way to get my set best regards |
#28
|
|||
|
|||
I will check with the US Mail Service.
UPS had a quote in the uppper $300.00 range. Normal shipping to California is in the $70.00 range. That is what I consiter Waaaaaay too much. I will shoot you a PM tomorrow when I find something out. Joe |
#29
|
|||
|
|||
Joe
I have Family in Phoenix, I visit them quite often i did not thought about that |
#30
|
|||
|
|||
This is my Zip Code in USA
AZ 85044 |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Laser Cut and Bent Parts - Europe | milkov | Profiled (laser cut) & bent steel plate | 33 | Fri 17 August 2012 13:13 |
Laser Cut and Bent Parts - India | dsingh82 | The Market Place | 10 | Thu 01 October 2009 04:14 |
Laser cut and formed parts | Castone | Profiled (laser cut) & bent steel plate | 5 | Sat 05 September 2009 00:40 |
Greetings all From United States | derekkest | Introduce yourself and start planning | 3 | Tue 09 June 2009 06:29 |
laser burnt pre-bent parts | ghostlx | Archives | 4 | Mon 22 September 2008 05:18 |