MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   Cutting various materials - bit selection, feeds, speeds (http://www.mechmate.com/forums/forumdisplay.php?f=82)
-   -   What type of cutter to use and what feeding speed to cut aluminium (http://www.mechmate.com/forums/showthread.php?t=1961)

hennie Fri 24 July 2009 09:12

What type of cutter to use and what feeding speed to cut aluminium
 
I had to cut some 3 mm aluminium today and what a disaster.Can anybody that did this type of cutting please give me advice on what type of cutter and the feeding speed and at what speed my cutter needs to turn.Must say a MM can bend aluminium.:)

Gerald D Fri 24 July 2009 09:24

Routing or cutting aluminium


All times are GMT -6. The time now is 17:33.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.