Cut list ...
I am trying really hard to compose a cut list
do I understand the follow below correctly ? thanks in advance Jason http://i234.photobucket.com/albums/e...92/jason-1.jpg |
I found the answer ... thanks
|
Where did you find the answer?
|
well ..
|
That all looks correct; in the picture, #1 and #2 also have 1010324 on their ends and
#21-#24 have 1010334 on their ends. Note that there aren't just two of #3/#4 1010302 - those are the two end bearers out of the set of cross bearers shown on 1010300; often there are 8 for standard size sheet goods, but it depends on the table length. |
Quote:
i couldnt figure out if there was 3 and 4 and then 8 more 1010302 yes i see the end caps and wont forget them thank you again |
start building and if there is something missing you know that you missed something don`t forget the decals at the end most oaks leave it till the end and then it is a race to get that number.Get the logo first !!!:D Bet you will have something standing in your shop soon to stick it on.
|
hmmm ...
Its true , I havent completed a mechmate , or even started on one ...
I have come to understand , the mechmate in the plans might not be for me ... as you guys already knew ... as it rather large and industrious ... however I have completed over 20 classes in my quest to complete a CnC table ... I have thought myself Vcarve and much trial and effort was able to this create file ... http://i234.photobucket.com/albums/e...mm92/final.jpg then I was able to cut this ... http://i234.photobucket.com/albums/e...2/IMG_5273.jpg and create this ... http://i234.photobucket.com/albums/e...2/IMG_5436.jpg http://i234.photobucket.com/albums/e...2/IMG_5435.jpg http://i234.photobucket.com/albums/e...2/IMG_5428.jpg Yesterday , I almost completed this .. just waiting on the tmolding ... before I install http://i234.photobucket.com/albums/e...2/IMG_0030.jpg http://i234.photobucket.com/albums/e...2/IMG_0033.jpg http://i234.photobucket.com/albums/e...2/IMG_0028.jpg http://i234.photobucket.com/albums/e...2/IMG_0023.jpg today I am starting on my 3rd project ... something like a single unit one these .. http://photos.mlive.com/detroit/2011...room_to_4.html I am currently having to much fun to build a mechmate or something like it , but I will be back ... Jason |
Is your "tiger" stuff a laser engraving ?
If yes, what is the power of your laser and advance settings ? |
No worries ..
Yes my Tiger stuff is laser engraved ... and I cant recall the settings off the top of my head ... I know it took several passes on both vector and raster mode ... before I was happy .. I can look them up for you later today ...
Here is a sign I am currently creating for the CnC with the different tool paths I am learning ... might cut it soon ... http://i234.photobucket.com/albums/e.../0304pdate.jpg hope you liked my work ... Jason |
A spammer left a message here earlier and this set off some misunderstanding between 2 members. I have deleted the major repercussions.
|
All times are GMT -6. The time now is 07:57. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.