MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   Golden Resources (http://www.mechmate.com/forums/forumdisplay.php?f=18)
-   -   CNC wood joints (http://www.mechmate.com/forums/showthread.php?t=2291)

normand blais Thu 26 November 2009 17:01

CNC wood joints
 
cnc wood joints include dxf and examples
Normand

Gerald D Thu 26 November 2009 19:56

Normand, you forgot the link?

normand blais Fri 27 November 2009 06:59

Hi Gerald ,sorry here it is
http://www.flexiblestream.org/Digita...Joints-001.php
How is te MM in your garage coming ?Grand pa soon
Normand:o

Robert M Fri 27 November 2009 07:15

Thanks Norm.... Nice to share this
A+ ;)

normand blais Fri 27 November 2009 07:25

Hé Bob I dont remember who said ''He is no fool who give what he can't keep, to gain what he cannot lose.Thank yous all for the knowledge here
Normand

domino11 Fri 27 November 2009 07:47

That is a very cool link. :)

PEU Fri 27 November 2009 11:22

amazing find, both parts of the joint can be machined using a cnc router, no need for jigs. Thanks!

sailfl Fri 27 November 2009 12:59

Normand,

Those are very cool. Interesting design. Thank you for sharing.

skippy Sat 28 November 2009 04:55

Normand,

Thanks for sharing that great find it will become very useful.

Kobus_Joubert Sat 28 November 2009 07:56

Thanks this is magic

lunaj76 Sat 28 November 2009 20:14

I like it

purpura Thu 27 May 2010 14:03

nice link, thanks

liaoh75 Sat 05 June 2010 09:06

Excellent Find!!!

lumberjack_jeff Sat 05 June 2010 23:02

How did I miss this? Excellent resource! Thanks!

normand blais Tue 28 December 2010 14:21

Some wood joints assembly pictures,no dxf
http://www.m-any.org/index.php?optio...id=46&catid=11

normand blais Sun 22 April 2012 14:30

new joints guys ,the nut joint and more

http://blog.makezine.com/2012/04/13/...ine+%28MAKE%29

Axel1966 Sun 22 April 2012 16:43

Nice ! Thanks for the link Normand.
Did you notice all the DXF files contains errors on the original version ?
Not very difficult to redraw, through.
It's still a good inspiration media.

normand blais Mon 23 April 2012 08:14

I did not notice they had dxf ,even better . It is more the concept I was looking at

normand blais Tue 02 September 2014 15:04

Regular flat pack joint with a twist and patented
http://www.google.ca/patents/US8590976

Retief Fri 17 October 2014 04:44

Hi Normand
I have also been looking for a strong joining methods and as a result started working on a CNC router friendly joining method and came up with a small plastic type clip-on type connector/ fitting. This allow you to easy connect cut components. None of the current KD fittings really work in a 2D profile cut method.
If you are interested, I can send you a link.
Retief

Alan_c Fri 17 October 2014 12:39

Hi Retief, I have seen a few of those around, are they still in production and are they available for boards thicker than 9mm?

Robert M Fri 17 October 2014 19:49

Hi Retief, please post here this link so we can all see this!
Tks ;)

normand blais Sat 18 October 2014 06:43

Hi Retief ,Sure want that link ,never get enough joints . . .
I am cheking this book , The Craft of Log Building by Hermann Phleps
Old Transylvanian Bavarian and northen european log joints ,lot of good ideas

Retief Mon 20 October 2014 00:34

Hi Guys
Apart from this site http://mypocketfactory.com/ offering designs and fittings, the fitting are available to fit a 6 and 9mm board.
Retief

Alan_c Mon 20 October 2014 01:30

What is the price of the fittings? both 6 and 9mm?

Retief Mon 20 October 2014 01:36

Hi Alan
I see you are just around the corner from me :)
The standard type T joint fitting in 6 and 9 mm are about R5.50 each (SA Rand). Corner extensions are about R2 each.
Retief

hennie Mon 20 October 2014 23:14

Do you supply in that big City in the north?

Retief Tue 21 October 2014 06:49

Hi Hennie
Yes, even to the big city's :)
Retief

hennie Tue 21 October 2014 08:18

Probably not with the post office!!!!.I will pm you later or pm me your tel no.

Alan_c Tue 21 October 2014 10:51

Hennie, get the Lions to bring it back to Joburg for you when they come back from being beaten here on Saturday! :D:p


All times are GMT -6. The time now is 20:16.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.