MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   Cutting various materials - bit selection, feeds, speeds (http://www.mechmate.com/forums/forumdisplay.php?f=82)
-   -   melamine particle board. 6mm 2 flute (http://www.mechmate.com/forums/showthread.php?t=4013)

zumergido Wed 13 February 2013 14:04

melamine particle board. 6mm 2 flute
 
hi people
iam doing some cuts on melamine 18mm made of particles
http://promotoragrocer.com/web/wp-co...elamina3-5.gif
cant find the right feed and/or speed.
i use SGS brand 6mm 90113 bits, its a two flute upcut and the downcut match.
iam getting a little of burn on the bit. its getting black on the time.
whats the optimal and fastest way to cut?
i have a 3hp 18000rpm spindle and set the machine to move at 4600cm/min has normal operation.
i found this calculator now http://zero-divide.net/index.php?page=fswizard
http://www.who-sells-it.com/images/c...log-000172.jpg

will update on the test.

zumergido Wed 13 February 2013 14:07

have made this calculation
http://zero-divide.net/index.php?pag..._tool_id=98309
will update how its going

ger21 Sun 17 February 2013 19:15

Do you mean 4600mm/min? If so, that's much too slow. Try 8000-12000mm/min at 18,000 rpm.


All times are GMT -6. The time now is 23:24.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.