South Africa Nema 34, rack and pinions and bearings
Total R24000 Zar
-4 x Stepper motor Nema 34 WT86STH118-6004A 5.6A 8.7N-m(1232oz-in) 99mm -4 x Stepper motor driver DQ860MA 7.8A 80V 256 micro-steps -4 x Power supply : 350W 60V -1 x Pc breakout board and cable + Extra set -16 x W3X bearings -4 x 2m module1 racks -4 x Module1 22 teeth pinions Contact me for more information or if you need more specifications or wiring diagrams? Please note this is the last set, so first come first serve. Kind Regards Leonard v.d. Merwe 072 779 7237 info@cherryweb.co.za http://www.cherryweb.co.za/PRINT/P1070558.jpg http://www.cherryweb.co.za/PRINT/P1070560.jpg http://www.cherryweb.co.za/PRINT/P1070561.jpg http://www.cherryweb.co.za/PRINT/P1070564.jpg http://www.cherryweb.co.za/PRINT/P1070565.jpg http://www.cherryweb.co.za/PRINT/P1070571.jpg http://www.cherryweb.co.za/PRINT/P1070572.jpg http://www.cherryweb.co.za/PRINT/P1070575.jpg http://www.cherryweb.co.za/PRINT/P1070576.jpg http://www.cherryweb.co.za/PRINT/P1070585.jpg http://www.cherryweb.co.za/PRINT/P1070587.jpg |
Some more information:
Stepper Motor Specifications: Step Accuracy = ±5% Temperature Rise = 80°C Max Ambient temperature Range = -20°C—+50° Insulation Resistance = 100MΩMin.500VC DC Dielectric Strength = 500V AC 1 minute Step Angle 1.8° Rate Voltage 3.08V Rate Current 5.6A Phase Resistance 0.55Ω Phase Inductance 5.5 mH Holding Torque 1232 (OZ-IN) Stepper Motor Driver: High performance Average current control, 2-phase sinusoidal output current drive Supply voltage from 24VDC to 80VDC Opto-isolated signal I/O Overvoltage, under voltage, overcurrent, phase short circuit protection 14 channels subdivision and automatic idle-current reduction 8 channels output phase current setting Offline command input terminal Motor torque is related to speed, but not related to step/revolution High start speed High holding torque under high speed Input Voltage 24-80 VDC Input Current < 6A Output Current 2.8A ~ 7.8A Consumption : 80W; Internal Insurance 10A Working Temprature -10~45℃ Stocking temperature -40℃~70℃ Weight 500G http://www.cherryweb.co.za/PRINT/MotorDimensions.jpg |
Price from 04/02/2019 is R16000
|
Is this still for sale?
Hi there, im also in SA, is this still for sale?
|
All times are GMT -6. The time now is 00:50. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.