Pictures of endstops
Hey all,
I'm adding endstops to my machine (I know, I know, I should have done this a long time ago) but I can't figure out where the gantry and car hit the rails. I can see the end blocks on the plan, but I don't know what runs into it. Can someone post a couple of pictures of their endstops and where they make contact? thanks. |
See this post for a pic of the "stop blocks" which are screwed to the carriages, and they hit the end-stops at the end of the rails
|
2 Attachment(s)
Here's a pic of one of my X-rail stop blocks and a pic of my Y-rail stop block. I made these up myself per the plans. If you bought a laser cut kit, it probably has some bent/cut blocks in the kit.
Ted |
All times are GMT -6. The time now is 05:53. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.