Z zero setter REALLY fantastic
At http://cnczone.com/forums/showthread.php?t=100594 . It is an addon to the Mach Blue screen set. Short version. At boot up do a reference all. Using the movable puck tool is zeroed to material. From now to machine power down the tool is zeroed using fixed touch off.
|
It's a great info! Works really well in the video, it will be the first thing to setup when my machine starts moving.
Thank you! |
Hey, hi Art….
Great to see your still around and active member !! Thanks for sharing this, not all are updated with this or see all what’s up on the CNCzone! I too will be installing this when time comes….seems like a BIG + Amicalement, Robert ;) |
I've been using it for some time and love it. Also I use the laser zeroing tool for the "x" "y" axis as well.
http://www.cnczone.com/forums/showthread.php?t=48752 |
Ditto! It works great!:D
|
still lurking
Finished up the JoeCNC Hybrid and it is a nice low use machine. Next project will be a 4by4 80 watt laser. helping devolop a DIY kit. Part of that will be to build another MM which I hope will be a 4by4 but will see if I really need a 4by8. Hybrid just won't hold up to the alumnium cutting that I will need. Will be great to be able to mill my own parts as planning of using a lot of PVC and alumnium in the MM. So much good information out there!
|
All times are GMT -6. The time now is 15:12. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.