Hello, A mechmate future TUNISIA
 

Hello
am Tunisian and I will soon build a mechmate Tunis
First of all I thank you for sharing all this information
I intend to build a machine for wood
I ask your opinion on this hardware configuration

http://www.slidesandballscrews.com/2m880n-microstepping-driver-p-303.html?cPath=44_97[/URL]

http://www.slidesandballscrews.com/s...ml?cPath=45_82

http://www.slidesandballscrews.com/p....html?cPath=54

http://www.slidesandballscrews.com/p....html?cPath=46

I'm sorry, my English is very bad, use the google translation

Welcome !!!!

Hi Hedi, your choice looks like this:

Motors:
SY85STH118-6004
Length 118mm

2M880N
8A current rating
24-70V DC supply
Autotune function for improved smoothness and performance.
Over-voltage, under-voltage, short circuit, overheat protection.

Power Supply:
PS705:
75V DC at 0A & 68V DC at 5A
340W (Continuous) = 340 VA

Parallel Break Out Board:
PCPPS-2


Those motors need quite lot of current and one power supply will not drive all 4 of them together.

hello Gerald
thank you very much to answer me quickly
Food I must have 2 (PS705)

but your opinion is good or not configuaration
because I need a supplier in London is my brother that I'll bring in Tunisia

SVP is what you have an address in London where I found the right configuration for my future Mechmate

thank you very much

Salut Hedi bienvenue !

hello Gerald
I'm still waiting your reply about the hardware configuration to make my future mechmate:confused:

thank you very much

salut FAWZI merci
contant de vous connaitre
de quel pays vous ete

thank you

See: Drawing Plan files for downloading - this is where you get the drawings

hello Gerald
thank you very much for answering me
so I understand your message that I must
* 4 engines SY85STH80 NEMA 34
* 4 drievers 2M880N
* 2 power supplies PS 705
* 1 Breakout PCPPS2

but you think this electronic kit is good for making a Mechmate
I need your opinion please :confused:

thank you very much