MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   Profiled (laser cut) & bent steel plate (http://www.mechmate.com/forums/forumdisplay.php?f=70)
-   -   Laser Parts cutting with cnc router (http://www.mechmate.com/forums/showthread.php?t=3185)

asif3244 Tue 30 November 2010 03:05

Laser Parts cutting with cnc router
 
5 Attachment(s)
Hi

Dear Gerald_D i am member since a year but was only learning, now i plan to get started, i am a Pakistani working in Abu Dhabi U A E, i will start to build in Pakistan, as import is a difficult process in Pakistan, importing in U A E is easier due to free port facilities, Laser cutting is available here in U A E but i have tried cutting with cnc router that our company import from china, i am gathering the parts at this time soon will start to build

Regards

asif3244 Tue 30 November 2010 03:35

Hi

here is the metal cutting video

http://www.metacafe.com/w/5575371

http://www.metacafe.com/watch/557537...th_cnc_router/

MetalHead Tue 30 November 2010 13:49

Is that 1/4 or 6mm steel? How fast is that router turning?

rayditutto Tue 30 November 2010 18:52

according to the video comment, "3mm old steel with 4mm carbide bit"

seems to produce a slurry (for lack of a better word) rather than chips

i'm curious also about the feed rate and type of bit (straight, spiral etc)

asif3244 Wed 01 December 2010 09:36

Hi

Robin, The steel is 3mm tool is 4mm carbide G-code made in art-cam steel tool
Feed rate 60 to 180 mm/min depends on type of tool, plunge rate 50 mm/min
V F D controlled speed should be adjusted to an normal hand drill tool


All times are GMT -6. The time now is 01:27.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.