New Build in planning Mid North NSW Australia
Hi all , after lurking for a long time I have decided to join you all on the build adventure.
I was inspired by Skippy and AuS MaDDoG's twin build and after thinking about it on and off for the last few years it seems like a good time to get started on it. I am intending to make a 2400 x 1200 machine for hobby use as it seems there is no major benefit to making a smaller unit if there is room in the workshop. Now to start trying to put together some lists for parts to purchase - as I havent found any BOM's yet on the site , the electronics side of it seem the most difficult to a novice , but hopefully if I ask enough dumb questions I will be able to get through it. |
Welcome Daniel!
|
Welcome and good luck.:)
|
Welcome to the team !!!
|
Welcome Daniel,
Glad our build gave you some inspiration, the MM build is a very worthwhile and very satisfying thing to do, I'm sure you will enjoy it and plenty of help here on the forums to get you through anything your not sure about. Good luck with your build. Cheers Tony. |
All times are GMT -6. The time now is 21:07. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.