MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   Motors & their mountings (http://www.mechmate.com/forums/forumdisplay.php?f=26)
-   -   Which Oriental Motor For 2018 (http://www.mechmate.com/forums/showthread.php?t=5641)

IamDave Sun 06 May 2018 05:50

Which Oriental Motor For 2018
 
Which Oriental Motor, is recommended for 2018?

IamDave Mon 14 May 2018 17:30

PK296A2A-SG7.2 from Oriental Motor Company $257

pblackburn Tue 22 May 2018 15:42

What are you cutting with your machine. If doing fine detail 3d work I would not recommend a Spur Gear because of the backlash that will always be present in a gearbox. I would recommend a stepper with a belt reduction instead.

IamDave Mon 28 May 2018 21:44

I cut exterior fretwork mainly 1 inch, and 1.25" Extira.

Tom Ayres Thu 31 May 2018 17:35

Even with belt reduction you're going to get some unsavory indications of the gears themselves.


All times are GMT -6. The time now is 06:45.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.