Stepper motors for sale
 

These are brand new, premium, stepper motors. The basic design is bipolar, 200 steps per revolution. These motors will work with any common drive designed for bipolar operation. The combination of rare earth magnets, high performance hybrid design, and precision manufacturing make these motors excellent for smooth operation with microstepping drivers. steppers are all 4 wire, two coil, designs, so there is none of the confusion common with 6 wire or 8 wire motors. Motors will include both female and male XLR connectors. Female connectors are all soldered on to the motors.wires between the connectors and the motors are all shielded.

Frame Size: 34
Shaft Diameter 0.5
Shaft Style round W/Flat
Torque Rating 640
Current Rating amps 3.0
Resistance ohms 0.42
Winding: bipolar 4 wire
Steps per revolution 200
Degrees per step 1.8





$75.00 ea = $300.00 for all 4 plus $12.00 cost of shipping cbboatworks@aol.com

• http://i36.photobucket.com/albums/e3...s/P4250006.jpg[/font]

[FONT='Calibri','sans-serif']http://i36.photobucket.com/albums/e3...s/P4250002.jpg[/font]

You moved to geared motors?

No I just bought more steppers than I will be using. I was planing to build more than one MM. and have extras setting around.

are this the motors for the bom machine o any difrens thanks

Gene,
Are these the same motors you are using on your current mechmate?

Do you have anything left that you are selling?

Kyle,
Take a look at the dates on the last posts, I dont think Gene is monitoring this thread anymore. You might try to PM him.