MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   Cutting various materials - bit selection, feeds, speeds (http://www.mechmate.com/forums/forumdisplay.php?f=82)
-   -   raw Particle board cutting (http://www.mechmate.com/forums/showthread.php?t=3820)

danilom Mon 18 June 2012 11:09

raw Particle board cutting
 
I need to cut a lot of 19mm Particle board, its raw, without melamine top.
Really its just packaging grade of board. Order is to cut about 20-30 sheets/month. There is around 35 pieces on one board so its a lot of cut path.

Anyone has in mind some router bit to use? Edge quality is of no concern as it will be covered with fabric later. I need something rough that will just rip it apart :)
had this in mind:
http://www.cmtutensili.com/show_items.asp?pars=RC~196~2 around 35eur for 8mm , think that it will be strong enough to cut it in one pass.

digger Mon 18 June 2012 20:04

You may try with compression bit. :D

sailfl Tue 19 June 2012 01:02

Compression bits are working for me when I have to cut sheet material.

danilom Tue 19 June 2012 02:23

digger:
samo ti zezaj

I said its a low grade particle board with lot of impurities, and edge does not have to be perfect or good.
So that is why I have not considered compression bit (price difference).


All times are GMT -6. The time now is 08:34.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.