Hello To One and All
 

Hi New To CNC

I Have a 10"x 5" gantry CNC Router i got from the USA.
it has never worked
i have now put in new break out boards and rewired it,
it Now Work With a few faults which i an trying to work out
it is running under mach3, which i find to be hard work.
:)
Well Thanks Mick

Welcome to the site. Did you mean 5 foot x 10 foot? Is it a MechMate? You should be able to do some research here around Mach 3. Everthing here is focused on the MechMate.