Wood carving machine
is it possible to use mechmate as wood carving machine?
|
Yes and no. As designed it can do deep relief up to the depth of the Z axis. Adding a 4th axis to rotate the piece horzonaly then gives full carving ability. Basicly the machine I am finishing up. http://turningaround.org/4_axis_mill.htm
MechMate is far superior to my design and modifying it for a 4th axis is not hard. My next machine will be a MechMate modifyed to rotate/carve columns 24" by 12'. Wish I had found MechMate first. |
1 Attachment(s)
Here is a link to carving machines pictures I collected on the web . Many of theses company are close now due to c.n.c. Thank to the ones who took those pics. and Gerald to allow posting.
|
Hi Norman, Visited your website and found some interesting carvings. Are these hand carved or machine done. If done with a CNC what's the machine you have. Obvoisly your machine should be having a 5th and 6th axis.
|
hi Fabrica they are done by hand that web site was before I got my c.n.c. shopbot .I see you doing carving to . How is your indexer lathe coming up? Bravo for building your MECHMATE
|
I will start to fix indexer today. It will be mounted parallel to Y axis.
|
All times are GMT -6. The time now is 17:18. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.