Direct motors 4Nm and 6,8Nm
 

Hi Gerald,
can I use two 4Nm direct motors (863S42 in attachment) for X axis and one 6,8 Nm direct motor (863S68 in attachment) for Y axis ? I will cut plywood max 15 mm.
Local CNC shop is selling set of these motors:

2pc 863S42 step motor 3-stage 4Nm
1pc 863S68 step motor 3-stage 6,8Nm
3pc 3ND883 driver for 3-stage motors, 80V, 8A
1pc PS1000/70 – power supply 70V/14A

all for 1.025 $

Thanks for help
Tomas