MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   Profiled (laser cut) & bent steel plate (http://www.mechmate.com/forums/forumdisplay.php?f=70)
-   -   Small Parts that keep You from building a MM (http://www.mechmate.com/forums/showthread.php?t=1041)

jbmclain Thu 23 October 2008 21:55

Small Parts that keep You from building a MM
 
What are some of the small parts that are not "Laser Cut" that are keeping you from building a MechMate?:confused:

My Father-in-law has a metal fabrication shop! If I can accrue a list of parts that people don’t have the means to machine, I can see if any of his workers would be interested in a side job.
This was a problem for me. Thank God for My father in law!!!!!:D

This is just an idea I had.

Joe

Gerald D Thu 23 October 2008 23:25

Joe, for a start, have a look at the drawings with "T" as the process.

sailfl Fri 24 October 2008 00:27

Joe,

Look at the router bracket. I purchased a router bracket for a Milwaukee router. It cost me more than a standard router because of the refinement screw. I have since removed the screw from the router and I could have used a generic bracket that would fit the Milwaukee motor. I would like to have a place to put the laser on the right side. If you could bring the price down, you would have a market.

Look at M1-20-220. I found some thing that will work but a reasonably priced support bushing.


All times are GMT -6. The time now is 07:54.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.