MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   701. Motor Drives (http://www.mechmate.com/forums/forumdisplay.php?f=14)
-   -   half-coil wiring of KL34H280-45-8A (http://www.mechmate.com/forums/showthread.php?t=5240)

buddyLumen Mon 30 May 2016 11:45

half-coil wiring of KL34H280-45-8A
 
If I'm using motor KL34H280-45-8A with Gecko 203V, and I want to do half coil wiring, and my 8 leads are:

Blue-Red
Yellow-Green

and

Brown-Black
Orange-White

would I use:
Blue-Red
(tape off Yellow-Green)

and

Brown-Black
(tape off Orange-White)?

And would it matter if I used:
Blue-Red
(tape off Yellow-Green)

and

Orange-White
(tape off Brown-Black)?

Basically, does one wiring pair have to be used with another specific wiring pair?

thanks

bradm Tue 31 May 2016 07:37

No, as long as the winding pairs aren't on the same winding, it doesn't matter. BTW, if the motor runs "backwards", you can swap ( reverse the polarity ) of any single pair ( if you swap both, keeps going the same way.

buddyLumen Wed 01 June 2016 19:19

Thanks for the info


All times are GMT -6. The time now is 09:01.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.