Laser Parts cutting with cnc router
5 Attachment(s)
Hi
Dear Gerald_D i am member since a year but was only learning, now i plan to get started, i am a Pakistani working in Abu Dhabi U A E, i will start to build in Pakistan, as import is a difficult process in Pakistan, importing in U A E is easier due to free port facilities, Laser cutting is available here in U A E but i have tried cutting with cnc router that our company import from china, i am gathering the parts at this time soon will start to build Regards |
Hi
here is the metal cutting video http://www.metacafe.com/w/5575371 http://www.metacafe.com/watch/557537...th_cnc_router/ |
Is that 1/4 or 6mm steel? How fast is that router turning?
|
according to the video comment, "3mm old steel with 4mm carbide bit"
seems to produce a slurry (for lack of a better word) rather than chips i'm curious also about the feed rate and type of bit (straight, spiral etc) |
Hi
Robin, The steel is 3mm tool is 4mm carbide G-code made in art-cam steel tool Feed rate 60 to 180 mm/min depends on type of tool, plunge rate 50 mm/min V F D controlled speed should be adjusted to an normal hand drill tool |
All times are GMT -6. The time now is 09:16. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.