MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   General - MM Build (http://www.mechmate.com/forums/forumdisplay.php?f=11)
-   -   Availibility of Fabricated Z slide (ball screw and stepper for use on Mechmate) (http://www.mechmate.com/forums/showthread.php?t=5618)

jeep534 Sun 31 December 2017 09:39

Availibility of Fabricated Z slide (ball screw and stepper for use on Mechmate)
 
Guys, And Gals
Has anyone found/used a prefabricated Z for the Mechmate planning to use a spindle and not a router.

I am just getting started and don't plan to use a spider plate ect. at this point

Thank You
archie

MetalHead Mon 01 January 2018 05:49

Archie, several have used other mounts in the Y-Car to mount the Z-slide. It will take some reading. Here is one example.

http://www.mechmate.com/forums/showt...0&postcount=35

DrewBen Thu 18 April 2019 08:39

Have you done this yourself, MetalHead? Or anyone else from the community.


All times are GMT -6. The time now is 16:52.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.