Aussie Builders - Laser cut parts!
3 Attachment(s)
G'day mates!
We have another batch of laser cut and bent kits! - 25pc + 3 stop blocks! These kits now include the stop blocks! The price of these kits are now $450 ex Melb. Postage & packing available. :) These new MkII stop block dont have any cracks were they are bent! For more information contact Rick (rnixon) Attachment 9856 Attachment 9859 Attachment 9860 |
Stop Blocks
Will the new type stop blocks have the two holes ready for M8 thread tapping for attachment to the gantry or do we now need to first drill then tap?
|
Hi Mark,
We did have one with those holes cut into them, however we found that once bent the holes would change and warp/stretch. So you do still need to drill/tap the stop blocks. Thanks, Rob. |
Does this kit have the Rail grinding skate included?
If not, can you do them aswell? John |
John,
From the picture in the previous post, I see the grinding skate parts in the upper right corner of the photo (above the ycar spider holding plates) Looks like a complete set of parts based on the non-geared *universal* style motor plates. |
Thanks for that, bit hard to see when you dont know what youre looking for ^_^
Will be in contact with Rick soon :) |
1 Attachment(s)
Hi Guys,
yes the newer style of griding skate is included and universal motor plates are included :) - Rob. |
All times are GMT -6. The time now is 22:57. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.