PROBLEM with 10 10 332 S
hello
I have a problem with the plans 10 10 332 S I read on the C of 180mm 2 cut of 3083mm but how is this possible with an angle of 60° it is too short it s ok with 2 angles of 45° there is necessarily something I don't understand? thank you for enlightening if you have been confronted with this reflection |
All times are GMT -6. The time now is 04:35. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.